
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

Designed and developed a custom PCB replicating the Arduino Uno using the ATmega328P microcontroller. Implemented voltage regulators, USB-to-serial interface, crystal oscillator, and I/O headers for full board
Pcb decoded is an open-source printed circuit board by vipin-7803, from the vipin-7803/Custom-Arduino-Compatible-PCB-Development-KiCad-ATmega328P-GitHub repository on GitHub. It is a 2-layer board of 68.6 × 50.8 mm with 25 parts on 56 nets, routed with 360 tracks and 55 vias.
It is built around the ATMEGA328P-PU. Its parts include 8 connectors, 6 capacitors, 3 resistors, 3 ICs and 3 diodes. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5 |
| 2 | 22pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D2, D3 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 1 | 100uf/25v | Capacitor_SMD:CP_Elec_4x5.4 | C6 |
| 1 | 10uf | Capacitor_SMD:CP_Elec_4x5.4 | C4 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | Analog pins | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J7 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U4 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J5 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical | J4 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | D | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | Digital pin 8-13 | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J1 |
| 1 | Digital pins 0-7 | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | POWER | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J8 |
| 1 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J6 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 68.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vipin-7803/Custom-Arduino-Compatible-PCB-Development-KiCad-ATmega328P-GitHub repository on GitHub, at the commit this page was made from: the board is pcb_decoded.kicad_pcb and its schematic pcb_decoded.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask vipin-7803 before reusing the design.