2 layers65 × 31.4 mm Capacitive Touch Lid, the printed circuit board in 3D

Capacitive Touch Lid

Capacitive Touch Button Module for ESP32-Zip

Size: 65 × 31.4 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 14
Nets: 36
Pads: 61
Tracks, vias: 70, 3
Pours: 4
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 28 Dec 2019
Updated: 31 Dec 2019

Overview

Capacitive Touch Lid is an open-source printed circuit board by vintlabs, from the vintlabs/Capacitive_Touch_Lid repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 31.4 mm with 14 parts on 36 nets, routed with 70 tracks and 3 vias.

Its parts include 5 capacitors, 2 resistors, 2 diodes and 1 connector. It belongs with the sensors and measurement boards and the ESP32 boards of this library.

README

README.md

Capacitive_Touch_Lid

Capacitive Touch Button Module for ESP32-Zip

Category and platform

Sensors and measurement ESP32

Topics

esp32 esp32-arduino capacitive-touch-sensor hardware pcb

Project files

Show this board on your page

https://pcbkit.io/boards/vintlabs/Capacitive_Touch_Lid

The board's own page, for a message or a post.

Source

Repository: vintlabs/Capacitive_Touch_Lid
Board file: Capacitive_Touch_Lid.kicad_pcb
Commit: 54928e5
Licence: GPL-3.0
Copies: 2 copies in 2 repositories

Parts

Qty	Value	Footprint	References
3	C_Variable	Capacitive_Touch_Lid:Round Touch Pad	C1, C2, C3
2	C	Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder	C4, C5
2	LED	Capacitive_Touch_Lid:HLMP-Q105 Reverse LED	D1, D2
2	R	Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder	R1, R2
1	Conn_02x20_Odd_Even	Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMD	J1

The 10 most common of 14 parts.

Similar boards

2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers32 × 22 mm
Diff driver
rene-dev/stmbl
AC Servo Driver for STM32F4
14 parts990GPL-3.0
2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915
2 layers34 × 109.9 mm
Tdisplay s3
landonr/homeThing
Wifi Smart Home Remotes that run on ESPHome
14 parts551GPL-3.0
2 layers45.3 × 42.7 mm
MainPcb
adamb314/ServoProject
Getting the most out of your hobby servo
14 parts545
2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0
2 layers54 × 47 mm
RatGDO OpenSource D1Mini ESP32
Kaldek/rat-ratgdo
Open source schematics for ratgdo PCB
14 parts511MIT
2 layers62 × 24 mm
Mai button
whowechina/mai_pico
Pico controller for Maimai
14 parts475

Questions

How big is the Capacitive Touch Lid PCB?

It measures 65 × 31.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Capacitive Touch Lid use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Capacitive Touch Lid KiCad files?

From the vintlabs/Capacitive_Touch_Lid repository on GitHub, at the commit this page was made from: the board is Capacitive_Touch_Lid.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Capacitive Touch Lid design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).