Skip to the content
2 layers130.7 × 104.8 mmAnglerfish, the printed circuit board in 3D

Anglerfish, is a split keyboard with 3x5 column staggered keys, two thumb keys, and a trackpoint.

Size
130.7 × 104.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
72
Nets
46
Pads
260
Tracks, vias
465, 94
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Mar 2024
Updated
30 Nov 2025

Overview

Anglerfish is an open-source printed circuit board by vinniefranco, from the vinniefranco/anglerfish-splitk-keeb repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 130.7 × 104.8 mm with 72 parts on 46 nets, routed with 465 tracks and 94 vias.

Its parts include 34 diodes, 4 connectors, 3 switches and 1 IC.

README

README.md

Anglerfish Keyboard

Anglerfish, is a split keyboard with 3x5 column staggered keys, two thumb keys, and a trackpoint.

The Trackpoint can be placed on either side, and the PCB is a reversible design.


Photo


Models

You can find all the step files for the case here

Electronic Components

Build of materials

Default Firmware Keymap

Keymap


Build Guide

Soon...

[!NOTE]
IMPORTANT: When submitting the gerber for manufacturing, set the PCB thickness to 0.8mm.

[!WARNING]
Gotchas Trackpoint ZMK support is bleeding edge. Thar be dragons.

Parts

72
QtyValueFootprintReferences
341N4148Diode_SMD:D_SOD-123D1, D1, D10, D10, D11, D11, D12, D12, D13, D13, D14, D14, D15, D15, D16, D16 +18
17kailh chocPCM_marbastlib-xp-choc:SW_choc_Reversible_1uCH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8, CH10, CH11, CH12, CH13, CH14, CH15, CH16, CH17 +1
7MountingHoleMountingHole:MountingHole_3mmH1, H1, H2, H3, H4, H5, H6
2SW_SPST_B3S-1000Button_Switch_SMD:SW_SPST_B3S-1000SW2, SW2
2TE_1-84952-2Connector_FFC-FPC:TE_1-84952-2_1x12-1MP_P1.0mm_HorizontalJ2, J2
1Conn_01x05_SocketConnector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_VerticalJ3
1JST_PH_S2B-PH-SM4-TBConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1LOGOgraphics:fishG***
1SW_SPST_PCM12Button_Switch_SMD:SW_SPDT_PCM12SW1
1TrackpointUSB4800-03-A_REVA:TrackpointTP
1supermini nrf / nice nano v2PCM_marbastlib-xp-promicroish:nice_nano_AH_USBupU1

The 68 most common of 72 parts.

Similar boards

  • 2 layers50 × 90 mmHackholidays, the printed circuit board in 3D

    Hackholidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    72 parts915
  • 2 layers59.9 × 82.5 mmCentronics 50Pin, the printed circuit board in 3D

    Centronics 50Pin

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    72 parts459GPL-3.0
  • 2 layers45.7 × 168.3 mmSPIN RCV PANEL, the printed circuit board in 3D

    SPIN RCV PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    72 parts431
  • 2 layers152.4 × 101.6 mm8088-FE2010A SBC, the printed circuit board in 3D

    8088-FE2010A SBC

    skiselev/micro_8088

    Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

    72 parts412GPL-3.0
  • 2 layers80.8 × 50.8 mmProbeSenseNumbers, the printed circuit board in 3D

    ProbeSenseNumbers

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    72 parts332
  • 2 layers23 × 120 mmFeather multi oled, the printed circuit board in 3D

    Feather multi oled

    idlehandsdev/volumetric_display

    TENEX OLED Displays

    72 parts312CC-BY-SA-4.0
  • 2 layers237.5 × 102.9 mmSerial, the printed circuit board in 3D

    Serial

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    72 parts301Unlicense
  • 2 layers109.2 × 78.7 mmDuo Adapter V0.5, the printed circuit board in 3D

    Duo Adapter V0.5

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    72 parts282

Questions

How big is the Anglerfish PCB?

It measures 130.7 × 104.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anglerfish use?

72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anglerfish KiCad files?

From the vinniefranco/anglerfish-splitk-keeb repository on GitHub, at the commit this page was made from: the board is assets/pcb/anglerfish.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anglerfish design in my own project?

Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).