

Asac esc brushed rev a
- Size
- 49.7 × 49.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 32
- Pads
- 223
- Tracks, vias
- 359, 54
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Sep 2023
- Updated
- 24 Sep 2023
Overview
Asac esc brushed rev a is an open-source printed circuit board by victorhook, from the victorhook/asac-esc-brushed repository on GitHub. It is a 2-layer board of 49.7 × 49.9 mm with 44 parts on 32 nets, routed with 359 tracks and 54 vias.
It is built around the INA180A4IDBVR(LX), HT7533S and AO3480C, with the SD103AWS among its other parts. Its parts include 11 capacitors, 10 resistors, 8 diodes, 8 connectors and 4 transistors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
4INA180A4IDBVR(LX)
SOT-23-5SOT-23-5 Current Sense Amplifiers ROHSlingxingicCurrent Sense AmplifiersHT7533S
SOT-23-40℃~+85℃ 1 100mA 100mV@(1mA) 3.3V 30V 3uA Fixed Positive Short Circuit Protection SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3480C
SOT-23-55℃~+150℃ 1 N-channel 1.3V 1.3W 12nC@10V 26mΩ@10V 30V 6.2A 600pF 60pF SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSD103AWS
SOD-3231 Independent 2A 350mA 40V 5uA@30V 600mV@200mA SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
README
README.mdA Simple And Cool brushed ESC
Why do cool fpv drones pretty much always use brushless motors? Well, because they are really good. BUT, they are quite expensive, and brushless ESCs are also quite expensive, since they require somewhat complex hardware and firmware. Thus, this project aims to make a simple and cool ESC that can be used for drones with brushed motors. Let's see how this goes!
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4, C5, C8, C9 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R6, R8, R10 |
| 4 | 470R | Resistor_SMD:R_0402_1005Metric | R2, R5, R7, R9 |
| 4 | AO3480C | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | RED | LED_SMD:LED_0603_1608Metric | D1, D3, D5, D7 |
| 4 | SD103AWS | Diode_SMD:D_SOD-323 | D2, D4, D6, D8 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C7, C10, C11 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 2m | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | Battery | Custom:Conn_01x02_VBAT_BIG | J2 |
| 1 | FC 1.27mm Pin Connector | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | J7 |
| 1 | FC JST 1.0mm Connector | Connector_JST:JST_SHL_SM08B-SHLS-TF_1x08-1MP_P1.00mm_Horizontal | J3 |
| 1 | HT7533S | Package_TO_SOT_SMD:SOT-23-3 | U1 |
| 1 | INA180A4IDBVR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | M1 | Custom:Conn_01x02_VBAT_one_round | J1 |
| 1 | M2 | Custom:Conn_01x02_VBAT_one_round | J4 |
| 1 | M3 | Custom:Conn_01x02_VBAT_one_round | J5 |
| 1 | M4 | Custom:Conn_01x02_VBAT_one_round | J6 |
| 1 | STM32C011F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SWD Debug | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J14 |
Similar boards
- 2 layers21.4 × 25.2 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers25 × 20 mm

RP2040-Decoder
gab-k/RP2040-Decoder
Cost effective DIY DCC Decoder for model railroad locomotives
57 parts131 - 4 layers100.1 × 60.2 mm

Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 4 layers86 × 34 mm

Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 4 layers44.8 × 76 mm

- 4 layers38.5 × 47 mm

Questions
How big is the Asac esc brushed rev a PCB?
It measures 49.7 × 49.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Asac esc brushed rev a use?
44 parts, built around the INA180A4IDBVR(LX), HT7533S, AO3480C and SD103AWS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Asac esc brushed rev a KiCad files?
From the victorhook/asac-esc-brushed repository on GitHub, at the commit this page was made from: the board is kicad/asac-esc-brushed-rev-a/asac-esc-brushed-rev-a.kicad_pcb and its schematic kicad/asac-esc-brushed-rev-a/asac-esc-brushed-rev-a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Asac esc brushed rev a design in my own project?
Its repository states no licence, so its author keeps all rights: ask victorhook before reusing the design.