
UAV PAYLOAD CONTROLLER
VGManasa/PCB-DESIGNS
A collection of PCB designs created using KiCad, including power supply, embedded, and electronics learning projects.

A collection of PCB designs created using KiCad, including power supply, embedded, and electronics learning projects.
Actodc is an open-source printed circuit board by VGManasa, from the VGManasa/PCB-DESIGNS repository on GitHub. It is a 2-layer board of 48.2 × 34 mm with 12 parts on 5 nets, routed with 39 tracks and 0 vias.
Its parts include 5 diodes, 2 resistors, 2 connectors and 1 capacitor.
This project is a simple AC to DC converter PCB designed using KiCad.
It converts an AC input into an unregulated DC output using a bridge rectifier and capacitor filtering.
The AC–DC converter consists of:
This design is intended for learning and academic purposes.
⚠️ This board is not regulated. Output voltage depends on input AC and load.
.kicad_sch).kicad_pcb)⚠️ This project involves AC input.
Designed by V G Manasa
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J1, J2 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | LED | LED_THT:LED_D5.0mm | D5 |
The 10 most common of 12 parts.

VGManasa/PCB-DESIGNS
A collection of PCB designs created using KiCad, including power supply, embedded, and electronics learning projects.

VGManasa/PCB-DESIGNS
A collection of PCB designs created using KiCad, including power supply, embedded, and electronics learning projects.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 48.2 × 34 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VGManasa/PCB-DESIGNS repository on GitHub, at the commit this page was made from: the board is ac-dc-converter/actodc.kicad_pcb and its schematic UAV PAYLOAD CONTROLLER/Hardware/PCB/FLOW_SENSOR.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask VGManasa before reusing the design.