4 layers37.8 × 12 mm
4 layers70 × 17.5 mm
Strip
versioduo/strip2🚦 V2 strip - MIDI LED Strip
- Size
- 70 × 17.5 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 41
- Nets
- 53
- Pads
- 324
- Tracks, vias
- 231, 89
- Pours
- 114
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Aug 2022
- Updated
- 21 Oct 2026
Overview
Strip is an open-source printed circuit board by versioduo, from the versioduo/strip repository on GitHub. It is a 4-layer board of 70 × 17.5 mm with 41 parts on 53 nets, routed with 231 tracks and 89 vias.
It is built around the 74AHC1G125GW, TPS78433QWDRBRQ1 and WS2812, with the RCLAMP0582N among its other parts. Its parts include 10 capacitors, 5 connectors, 4 resistors, 3 ICs and 3 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
4
74AHC1G125GW
SOT-353-40℃~+125℃ 1 1 2V~5.5V 4.8ns@5.5V,50pF 40uA 74AHC 8mA 8mA Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
TPS78433QWDRBRQ1
SON-8(3x3)-40℃~+150℃@(Tj) 1 115mV@(300mA) 25uA 3.3V 300mA 30uVrms 50dB@(100kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Soft Start、Enable Positive SON-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
RCLAMP0582N
DFN-6(1.2x1)DFN-6(1.2x1) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICUncategorised
README
hardware/strip/README.mdParts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0u1 | V2_Capacitor_SMD:C_1608 | C104, C105, C106, C107, C201 |
| 3 | Fiducial_Paste | V2_Fiducial:Fiducial_0.5mm_Mask1mm_Paste | FID101, FID102, FID103 |
| 3 | WAGO 2065-100 | V2_Connector_WAGO:2065-100 | J201, J202, J203 |
| 2 | 10u | V2_Capacitor_SMD:C_2012 | C108, C109 |
| 2 | 18p | V2_Capacitor_SMD:C_1608 | C101, C102 |
| 2 | 2mm | V2_Mechanical:MountingHole_2mm | H101, H102 |
| 2 | 5k1 | V2_Resistor_SMD:R_1608 | R103, R104 |
| 2 | SKSG | V2_Button_Switch_SMD:SKSG | SW101, SW102 |
| 2 | WS2812 | V2_LED:WS2812-2020 | D102, D103 |
| 1 | 100k | V2_Resistor_SMD:R_1608 | R101 |
| 1 | 10u | V2_Capacitor_SMD:C_1608 | C103 |
| 1 | 32k768 | V2_Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y101 |
| 1 | 330R | V2_Resistor_SMD:R_1608 | R102 |
| 1 | 74AHC1G125 | V2_Package_TO_SOT_SMD:SOT-23-5 | U201 |
| 1 | ATSAMD51G | V2_Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm_ThermalVias | U101 |
| 1 | Board_strip | V2_Artwork:Board_strip_Small | ICON101 |
| 1 | Button-bottom | V2_PCB_Devices:PCB_Button-bottom | SWB101 |
| 1 | Cortex | V2_Connector_Debug:Cortex | J101 |
| 1 | DX07S016JA3 | V2_Connector_USB:JAE_DX07S016JA3 | J102 |
| 1 | Layer_Numbers-4 | V2_Production:Layer_Numbers-4 | INFO102 |
| 1 | Minus | V2_Artwork:Minus_Small | ICON103 |
| 1 | Orange | V2_LED:LED_1608 | D101 |
| 1 | Plus | V2_Artwork:Plus_Small | ICON104 |
| 1 | RCLAMP0582N | V2_ESD_Suppressor:SLP1210N6 | ESD101 |
| 1 | TPS78433QWDRBRQ1 | V2_Package_SON:VSON-8-1_3x3mm_P0.65_EP1.65x2.4mm | U102 |
| 1 | V2-logo | V2_Artwork:Logo_Small | ICON102 |
| 1 | ~ | V2_Production:Revision | INFO101 |
Questions
How big is the Strip PCB?
It measures 70 × 17.5 mm and has 4 copper layers, 1.62 mm thick.
What parts does the Strip use?
41 parts, built around the 74AHC1G125GW, TPS78433QWDRBRQ1, WS2812 and RCLAMP0582N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Strip KiCad files?
From the versioduo/strip repository on GitHub, at the commit this page was made from: the board is hardware/strip/strip.kicad_pcb and its schematic hardware/strip-mini/LEDStrip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Strip design in my own project?
Its repository states no licence, so its author keeps all rights: ask versioduo before reusing the design.
More from versioduo/strip
1Similar boards
- 4 layers60 × 35 mm
- 4 layers60 × 60 mm
- 4 layers70 × 70 mm
- 4 layers70 × 17.5 mm
- 4 layers180 × 35 mm
- 6 layers150 × 35 mm
- 6 layers50 × 50 mm
- 2 layers82.5 × 94 mm
Fan pwm disconnecter panel 2x9
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
382 parts253GPL-3.0