

GreenRinger
Capstone Project @ UNL, 2020-2021
- Size
- 10.2 × 116 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 20
- Pads
- 70
- Tracks, vias
- 189, 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Aug 2021
- Updated
- 11 May 2022
Overview
GreenRinger is an open-source printed circuit board by VegaDeftwing, from the VegaDeftwing/AnalogDrumMachine repository on GitHub. It is a 2-layer board of 10.2 × 116 mm with 32 parts on 20 nets, routed with 189 tracks and 10 vias.
Its parts include 14 resistors, 7 capacitors, 4 diodes, 3 transistors and 3 connectors.
README
README.mdAnalogDrumMachine
Capstone Project @ UNL, 2020-2021
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9, R12, R13 |
| 4 | 47nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C4, C5, C6 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6, R7 |
| 2 | 68k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11 |
| 2 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2 |
| 2 | Q_NPN_BCE | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C7 |
| 1 | 100pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 160k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 18k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 2.2M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14 |
| 1 | 560k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 6.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D4 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1 |
More from VegaDeftwing/AnalogDrumMachine
8- 2 layers149.9 × 48.3 mm

- 2 layers94.8 × 35.3 mm

- 2 layers80 × 41.9 mm

- 2 layers76.2 × 41.9 mm

- 2 layers57.8 × 37.5 mm

- 2 layers59.7 × 32.4 mm

- 2 layers38.7 × 39.4 mm

- 2 layers10 × 17.5 mm

Similar boards
- 2 layers50 × 23.2 mm

Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
32 parts1kGPL-3.0 - 2 layers136.8 × 54.2 mm

Retropie zero
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
32 parts915 - 2 layers

- 2 layers16 × 20 mm

ESPKey
octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller
32 parts353GPL-2.0 - 2 layers82 × 40.9 mm

Display7447
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
32 parts269 - 2 layers40 × 38 mm

Shield
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
32 parts192MIT - 2 layers47 × 39 mm

Qrss clock tx
swharden/AVR-projects
A collection of standalone AVR projects written in C
32 parts184MIT - 2 layers30.9 × 63 mm

Stm32-io extend
hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
32 parts170CC0-1.0
Questions
How big is the GreenRinger PCB?
It measures 10.2 × 116 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GreenRinger use?
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GreenRinger KiCad files?
From the VegaDeftwing/AnalogDrumMachine repository on GitHub, at the commit this page was made from: the board is PCBs/GreenRinger/GreenRinger.kicad_pcb and its schematic PCBs/GreenRinger/GreenRinger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GreenRinger design in my own project?
Its repository states no licence, so its author keeps all rights: ask VegaDeftwing before reusing the design.