

VedgaZigBee
RFStar ZigBee modules development board PCB (designed by Vedga)
- Size
- 48.9 × 55.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 44
- Pads
- 126
- Tracks, vias
- 468, 28
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jan 2023
- Updated
- 26 Jan 2023
Overview
VedgaZigBee is an open-source printed circuit board by vedga, from the vedga/pcb-RF-BM-2652 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 48.9 × 55.2 mm with 11 parts on 44 nets, routed with 468 tracks and 28 vias.
It is built around the RF-BM-2652P2. Its parts include 7 connectors, 2 ICs, 1 capacitor and 1 resistor. It belongs with the radio and wireless and microcontroller boards boards of this library.
Main components
1README
README.mdpcb-RF-BM-2652
RFStar ZigBee modules development board PCB (designed by Vedga)
Sorry, me forget to route NRESET signal from module to the J3 connector. Use pullup resistor R1 with capacitor or connect NRESET via J1 debug port.
Connect to the XDS110 (module must be powered from external source)
Module (J1 male) <=> XDS110 (20 pin female header)
- [1] <=> [8] GND
- [3] <=> [11] TCK
- [4] <=> [1] SWDIO/TMS
- [7] <=> [2] NTRST
- [2] <=> [5] VTRef (optional, may be omitted)
Connect to Banana PI M1
Module (J3 male) <=> Banana PI M1
- [1] <=> [2 GPIO J12] 3.3V
- [2] <=> [10 GPIO CON3] /dev/ttyS2 RxD
- [6] <=> [] BSL
- [16] <=>
- [19] <=> [8 GPIO CON3] /dev/ttyS2 TxD
- [21] <=> [8 GPIO J12] GND
/boot/armbianEnv.txt
verbosity=1
bootlogo=false
console=both
disp_mode=1920x1080p60
overlay_prefix=sun7i-a20
rootdev=UUID=fc4defda-2429-486b-8c7c-35517c9f0f29
rootfstype=ext4
overlays=uart2 uart3 uart4 uart5 uart6 uart7
param_uart3_pins=b
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:uParts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J6 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x11_P2.54mm_Vertical | J3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | RF-BM-2652B1 | VedgaZigBee:RF-BM-2652B1 | U1 |
| 1 | RF-BM-2652P2 | VedgaZigBee:RF-BM-2652P2 | U2 |
Similar boards
- 2 layers60.5 × 44 mm

- 2 layers60 × 30 mm

Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm

- 2 layers26 × 30 mm

Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm

2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers

- 2 layers47 × 33 mm

Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT
Questions
How big is the VedgaZigBee PCB?
It measures 48.9 × 55.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VedgaZigBee use?
11 parts, built around the RF-BM-2652P2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VedgaZigBee KiCad files?
From the vedga/pcb-RF-BM-2652 repository on GitHub, at the commit this page was made from: the board is VedgaZigBee.kicad_pcb and its schematic VedgaZigBee.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VedgaZigBee design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).