
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

3 DOF Robotic Arm developed on STM32F1
Robot arm is an open-source printed circuit board by vamsikrishnaA9, from the vamsikrishnaA9/Robotic_Arm repository on GitHub, published under the MIT licence. It is a 2-layer board of 113 × 85 mm with 15 parts on 52 nets, routed with 251 tracks and 4 vias.
Its parts include 8 connectors and 1 IC. It belongs with the robots and motor control boards and the STM32 boards of this library.
Welcome to 3-DOF Robotic Arm project!. This repository houses all the software design files, documentaion and PCB files for the Robotic Arm.
This Robitic Arm is equipped with 3 rotational joints providing adaptability and flexibility in moving 3-D space.This project includes Mechanical CAD design source files were originally forked from the repository
maintained by Florin Tobler, which can be found at https://github.com/ftobler/robotArm.
This robot was developed using NEMA 17 stepper motors and 3D printed with PLA plastic. The Maximum height can go up to 250mm and the Maximum length can reach 200mm horizontally. Due to the nature of the PLA material, the Robot can bear a 250gms payload.
Different sets of bearings and screws are used for smooth joint movements.
Implemented inverse kinematics to calculate all the robot joints and made the stepper motors rotate according to the joint angles.
This project was built using embedded C.
It is the most commonly used stepper motor sized in various applications including 3D printers various CNC machines and Robotic arms. NEMA 17 has a standard frame size of 1.7 inches. The motor is a Bipolar (4-wire) configuration. NEMA 17 motors typically have a step angle of 1.8 degrees per step. To make one revolution it takes 200 steps to complete and make it suitable for high-precision applications.
It is the specific motor driver, especially for NEMA 17 motors. The driver has a maximum current limit of 2A. A4988 driver has micro-stepping features which are essential in operating the NEMA 17 in high precision.
Full Mode 200 steps
Half Mode 400 steps
1/4 Mode 800 steps
1/8 Mode 1600 steps
1/16 Mode 3200 steps.
Inverse kinematics is a mathematical approach used in robotics to determine the joint configurations required to position a robotic arm or end-effector at a specific location and orientation in three-dimensional space.

Software - Keil u vision
Hardware - STM32F1 microcontroller
A4988 Motor drivers
NEMA 17 Stepper motors
Power supply (0-30V)
git clone https://github.com/vamsikrishnaA9/Robotic_Arm.git1. double *inv_KE(double X3, double Y3, double Z3)
This function solves the inverse kinematics for the given coordinates X3, Y3, Z3 and returns the pointer of 3 joint angles.
2. void Robot_target(double* Out)
This function sets the target coordinates based on the previous position of the Arm robot.
3. void Robot_move(double angle, int type)
This function rotates the stepper motors at the desired angle.
Contributions are what makes the open-source community such an amazing place to learn, inspire, and create. Any contributions you make are greatly appreciated.
If you have a suggestion that would make this better, please fork the repo and create a pull request. You can also simply open an issue with the tag "enhancement". Don't forget to give the project a star! Thanks again!
git checkout -b feature/AmazingFeature)git commit -m 'Add some AmazingFeature')git push origin feature/AmazingFeature)Distributed under the MIT License. See LICENSE.txt for more information.
Vamsi Krishna - vamsi.vk1596@gmail.com
Project Link: https://github.com/vamsikrishnaA9/Robotic_Arm
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8 |
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 3 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3 |
| 2 | Conn_01x17_Male | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J4, J5 |
| 1 | STM32F1 | Vamsi:STM32F1 | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 113 × 85 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the vamsikrishnaA9/Robotic_Arm repository on GitHub, at the commit this page was made from: the board is Robot_arm/Robot_arm.kicad_pcb and its schematic Robot_arm/Robot_arm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).