4 layers254 × 137.7 mm
S100 ColorMagic-1.1-006
RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
150 parts1
2 layers
Aniol64
vampirehunt2/aniol64z80-based computer
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 94
- Pads
- 418
- Tracks, vias
- 1,350, 320
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Oct 2021
- Updated
- 28 Oct 2026
Overview
Aniol64 is an open-source printed circuit board by vampirehunt2, from the vampirehunt2/aniol64 repository on GitHub. It is a 2-layer board with 54 parts on 94 nets, routed with 1,350 tracks and 320 vias.
It is built around the 74LS14PC, 74LS32SC and 74LS151PC, with the 74LS573PC, 74LS74PC and ACO-18.432MHZ-EK among its other parts. Its parts include 17 capacitors, 13 resistors, 11 ICs, 4 connectors and 1 diode.
Main components
6
74LS14PC
PDIP-14InvertersTexas Instruments
74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates
74LS151PC
DIP-160℃~+70℃ 12.5ns 4.75V~5.25V 400uA 6mA 74LS 8mA Tri-state output DIP-16 Signal Switches, Multiplexers, Decoders ROHSonsemiSignal Switches, Multiplexers, Decoders
74LS573PC
DIP-200℃~+70℃ 10ns 3ns 4.75V~5.25V 74LS 8 D Latch Tri-State DIP-20 Latches ROHSTexas InstrumentsLatches74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops
ACO-18.432MHZ-EK
DIP-4-20℃~+70℃ 18.432MHz 30mA 5V HCMOS、TTL DIP-4 Crystal Oscillators ROHSAbraconCrystal Oscillators
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C17 |
| 9 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R6, R7, R8, R10, R11, R13 |
| 2 | 74LS14 | Package_DIP:DIP-14_W7.62mm_Socket | U2, U3 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket | U1, U4 |
| 2 | Conn_01x16_Male | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | KBD_CONN1, LCD_CONN1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 100u | Capacitor_THT:CP_Radial_D14.0mm_P7.50mm | C1 |
| 1 | 10n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C16 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm_Socket | ROM1 |
| 1 | 47n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C15 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm_Socket | U5 |
| 1 | 74LS138 | Package_DIP:DIP-16_W7.62mm_Socket | U14 |
| 1 | 74LS151 | Package_DIP:DIP-16_W7.62mm_Socket | U13 |
| 1 | 74LS573 | Package_DIP:DIP-20_W7.62mm_Socket | U11 |
| 1 | 74LS590 | Package_DIP:DIP-16_W7.62mm_Socket | U10 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm_Socket | U12 |
| 1 | 8x4k7 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | ACO-1.8432MHz | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | Buzzer | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x24_Male | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Horizontal | EXP_PORT1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Horizontal | J3 |
| 1 | D | Diode_THT:D_5KPW_P7.62mm_Vertical_AnodeUp | D1 |
| 1 | DART | Package_DIP:DIP-40_W15.24mm_Socket | U9 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | R_POT_TRIM | Potentiometer_THT:Potentiometer_TT_P0915N | RV1 |
| 1 | Z80 | Package_DIP:DIP-40_W15.24mm_Socket | CPU1 |
Questions
What parts does the Aniol64 use?
54 parts, built around the 74LS14PC, 74LS32SC, 74LS151PC and 74LS573PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aniol64 KiCad files?
From the vampirehunt2/aniol64 repository on GitHub, at the commit this page was made from: the board is A64kiCad/aniol64.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aniol64 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vampirehunt2 before reusing the design.
Similar boards
- 2 layers218 × 125 mm
EVA1 production
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
116 parts - 2 layers205.7 × 236.9 mm
- 4 layers337.6 × 105.7 mm
ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 4 layers194.5 × 188.6 mm
MyCpu
fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.
162 parts18MIT - 2 layers400.9 × 280.5 mm
- 2 layers486 × 306.3 mm
- 2 layers630 × 300 mm
