

ESP32 Smart Home Controller - KiCad test projects
- Size
- 132 × 130 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 70
- Pads
- 176
- Tracks, vias
- 271, 9
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Oct 2026
- Updated
- 17 Oct 2026
Overview
Testing3 is an open-source printed circuit board by vairabarath, from the vairabarath/smart-home-controller- repository on GitHub. It is a 2-layer board of 132 × 130 mm with 30 parts on 70 nets, routed with 271 tracks and 9 vias.
It is built around the ESP32-S3-WROOM-1-N8, ULN2003A and SRD-05VDC-SL-C. Its parts include 6 resistors, 6 ICs, 6 switches, 5 connectors and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysSRD-05VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 15A 250V@AC 360mW 5 5V 70Ω Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
README
README.mdsmart-home-controller-
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5 |
| 4 | SRD-05VDC-SL-C | Relay_THT:Relay_SPDT_Omron_G2RL-1-E | K1, K2, K3, K4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J2, J3, J4, J5 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U6 |
| 1 | ESP32_GPIO | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | ULN2003A | Package_DIP:DIP-16_W7.62mm | U1 |
More from vairabarath/smart-home-controller-
5- 2 layers132 × 130 mm

- 2 layers132 × 130 mm

- 2 layers89.7 × 70.3 mm

Testing 1
vairabarath/smart-home-controller-
ESP32 Smart Home Controller - KiCad test projects
11 parts - 2 layers61 × 63 mm

- 2 layers82 × 36 mm

Similar boards
- 2 layers99 × 99 mm

- 4 layers100 × 80 mm

BluePill SmartNode RS485
SimulatedFlow/kicad-board-2026-07-16-bluepill-smartnode-rs485
STM32 Bluepill SmartNode - RS485 bus node carrier with 2 relays for Modbus / field bus setups. Hand-solderable THT, bare PCB. KiCad source files.
32 parts - 2 layers200 × 100 mm

Smart home
vishal007-hacker/smart-home
ESP32-based smart home controller for switching 4 independent 230V AC loads, with per-channel current and voltage sensing, manual override buttons, status LEDs, and an I²C LCD display.
76 parts - 2 layers88 × 130 mm

Windowmaster controller v2
Simplycissmus/windowmaster-s3-controller
Open hardware and ESP32-S3 firmware for a local 24 V window actuator controller with MQTT and Home Assistant integration.
68 parts1 - 2 layers

- 2 layers46 × 31.5 mm

- 2 layers155 × 75 mm

Hacklock-2137
p-durlej/hswaw-hscloud
Controller board for next gen hacklock door / lock / access control system.
119 parts - 2 layers87 × 71 mm

Questions
How big is the Testing3 PCB?
It measures 132 × 130 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Testing3 use?
30 parts, built around the ESP32-S3-WROOM-1-N8, ULN2003A and SRD-05VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testing3 KiCad files?
From the vairabarath/smart-home-controller- repository on GitHub, at the commit this page was made from: the board is testing 3/testing3.kicad_pcb and its schematic testing 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testing3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vairabarath before reusing the design.