
Core micro surface nohotswap
zeerolux/core-micro
A lighting controller, control surface with 5 faders and 2 encoders, a USB DMX interface, an ARTNET node, and a standalone DMX generator.

An open-hardware midi controller with esp32-c3, 4 linear faders, 8 keyswitches.
Miixer is an open-source printed circuit board by v3xlabs, from the v3xlabs/miixer repository on GitHub. It is a 2-layer board of 100 × 100 mm with 42 parts on 81 nets, routed with 496 tracks and 67 vias.
It is built around the ESP32-C3-WROOM-02-H4, ADS1115IDGS and PCF8574T, with the USBLC6-2SC6, SK6812 and PTL60-15G1-103B2 among its other parts. Its parts include 12 diodes, 8 switches, 6 ICs, 5 resistors and 2 capacitors. It belongs with the ESP32 and RISC-V boards of this library.
An open-hardware midi controller with esp32-c3, 4 linear faders, 8 keyswitches.
[!NOTE] This is a work in progress.
See the docs folder for the rendered schematics, PCBs, and 3D renders.
Due to the fact that this devices uses common off-the-shelf I2C ICs and is esp32-c3 based, you can easily use it with ESPHome.
# TODO: This yaml file is work in progress, its ment to give an impression, its has not been confirmed functional.
i2c:
sda: GPIO8
scl: GPIO9
scan: true
# 4x Fader Input
ads1115:
address: 0x48 # todo confirm
update_interval: 5s
# todo interrupt pin (io6)
# 4x Fader LEDs
tcl59208f:
id: led_drv # optional
address: # todo
# 8x Keyswitch Input
pcf8574:
id: expander # optional
address: 0x20 # todo confirm
# todo interrupt pin (io7)
binary_sensor:| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D9, D10, D11, D12 |
| 8 | SW_SPST | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D5, D6, D7, D8 |
| 4 | PTL60-15G1-103B2 | 00_Luc:PTL6015G1103B2 | FAD1, FAD2, FAD3, FAD4 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | C | Capacitor_SMD:C_0201_0603Metric | C2, C3 |
| 2 | miixer_qrcode_0.35px | 00_Luc:miixer_qrcode_0.35px | QR*****, QR***** |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | PCF8574T | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U5 |
| 1 | Qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | QWIIC1 |
| 1 | TLC59208FIRGYR | TLC59208FIRGYR:RGY16_2P55X2P05 | U6 |
| 1 | TYPE-C 16PIN 2MD(073) | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |

zeerolux/core-micro
A lighting controller, control surface with 5 faders and 2 encoders, a USB DMX interface, an ARTNET node, and a standalone DMX generator.



CtrlAltJon/PeterThePowerMeter
IoT Power Meter for real-time energy monitoring. Includes a local color display, acoustic alarms, and a web interface for smart home integration (Home Assistant/MQTT).



HJRaptor/mymacro
On the other hand, the part I enjoyed the most was working with CAD. With my existing CAD skills, I was able to confidently create a functional layout for the macropad’s physical structure.

RunningJoke/reactionButton
ReactPod: ESP32-C3 reaction buzzers – firmware, Config App (PWA), tools, hardware
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ESP32-C3-WROOM-02-H4, ADS1115IDGS, PCF8574T and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the v3xlabs/miixer repository on GitHub, at the commit this page was made from: the board is miixer.kicad_pcb and its schematic miixer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask v3xlabs before reusing the design.