

Squarevco
(mine doesn't look as fancy but we're getting somewhere lol)
- Size
- 65.2 × 41.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 27
- Pads
- 159
- Tracks, vias
- 293, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jan 2026
- Updated
- 6 Jul 2026
Overview
Squarevco is an open-source printed circuit board by v1peridae, from the v1peridae/v1permodsynth repository on GitHub. It is a 2-layer board of 65.2 × 41.2 mm with 42 parts on 27 nets, routed with 293 tracks and 38 vias.
It is built around the L7805. Its parts include 15 resistors, 9 capacitors, 6 ICs, 4 connectors and 2 diodes. It belongs with the PIC boards of this library.
Main components
1README
README.mdThis is the v1permodsyth
- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed)
- They look something like this:
(mine doesn't look as fancy but we're getting somewhere lol)
it currently has:
-
square vco
-
vca
- guitar input
-ar
-4lfo
-fm drums
more on the process
i've never really made anything this complex so i totally understand if it might not work on the first go but i'm really happy with how far i've gotten with this. if you'd like to learn more about the making process check out my JOURNAL.md
credits to https://www.bartonmusicalcircuits.com/ which is where i learnt how to do all of this :)
casing - it currently doesnt have a case but i have all the measurements and hope to build a wooden or hard cardboard case
note on commits: guh it totally skipped my mind to make frequent commits of this so i accept my fate if it means my hours get reduced since this is one is on me.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100K | Resistor_SMD:R_0805_2012Metric | R2, R5, R7, R8, R14, R16, R17, R18 |
| 4 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U4, U5, U6 |
| 2 | .01uF | Capacitor_SMD:C_0805_2012Metric | C3, C8 |
| 2 | .01uf | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | 10uf | Capacitor_SMD:CP_Elec_5x5.4 | C6, C7 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123 | D1, D2 |
| 1 | 120K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 20mhz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | A100K | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | FCV1 |
| 1 | AudioJack2_Dual_Switch | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | AudioJack3_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | B100K | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | FINE1 |
| 1 | COARSE | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | B100K1 |
| 1 | Conn_01x10_Pin | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J4 |
| 1 | L7805 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | PIC12F683-xMC | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TUNE | Potentiometer_SMD:Potentiometer_Bourns_3269W_Vertical | 25K1 |
More from v1peridae/v1permodsynth
5- 4 layers74.4 × 85.1 mm

- 2 layers94.2 × 96.6 mm

- 4 layers38.3 × 51.7 mm

- 2 layers39.1 × 38.1 mm

Guitar input eg
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
34 parts - 2 layers86 × 38.2 mm

V1permodsynth
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
28 parts
Similar boards
- 2 layers40.6 × 110 mm

Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm

- 2 layers90.8 × 35.6 mm

ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers91.4 × 71.1 mm

Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers144.1 × 182.2 mm

SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0 - 2 layers106.1 × 155 mm

Motherboard
Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
84 parts94
Questions
How big is the Squarevco PCB?
It measures 65.2 × 41.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Squarevco use?
42 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Squarevco KiCad files?
From the v1peridae/v1permodsynth repository on GitHub, at the commit this page was made from: the board is square-vco/squarevco.kicad_pcb and its schematic ar/ar/ar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Squarevco design in my own project?
Its repository states no licence, so its author keeps all rights: ask v1peridae before reusing the design.