

V1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
- Size
- 86 × 38.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 22
- Pads
- 84
- Tracks, vias
- 139, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jan 2026
- Updated
- 6 Jul 2026
Overview
V1permodsynth is an open-source printed circuit board by v1peridae, from the v1peridae/v1permodsynth repository on GitHub. It is a 2-layer board of 86 × 38.2 mm with 28 parts on 22 nets, routed with 139 tracks and 8 vias.
It is built around the TL072 and L7805. Its parts include 8 capacitors, 8 resistors, 3 ICs, 3 diodes and 2 connectors. It belongs with the PIC boards of this library.
Main components
2TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational AmplifierL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis is the v1permodsyth
- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed)
- They look something like this:
(mine doesn't look as fancy but we're getting somewhere lol)
it currently has:
-
square vco
-
vca
- guitar input
-ar
-4lfo
-fm drums
more on the process
i've never really made anything this complex so i totally understand if it might not work on the first go but i'm really happy with how far i've gotten with this. if you'd like to learn more about the making process check out my JOURNAL.md
credits to https://www.bartonmusicalcircuits.com/ which is where i learnt how to do all of this :)
casing - it currently doesnt have a case but i have all the measurements and hope to build a wooden or hard cardboard case
note on commits: guh it totally skipped my mind to make frequent commits of this so i accept my fate if it means my hours get reduced since this is one is on me.
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.01uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C4, C5, C7, C8 |
| 3 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C3 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 2 | B100K | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | ATTACK1, DECAY1 |
| 1 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 100K | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 33K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J2 |
| 1 | Conn_01x10_Pin | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J1 |
| 1 | D_Schottky | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | LOGO | LOGO | G*** |
| 1 | PIC12F683-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm | U3 |
More from v1peridae/v1permodsynth
5- 4 layers74.4 × 85.1 mm

- 2 layers94.2 × 96.6 mm

- 4 layers38.3 × 51.7 mm

- 2 layers65.2 × 41.2 mm

Squarevco
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
42 parts - 2 layers39.1 × 38.1 mm

Guitar input eg
v1peridae/v1permodsynth
(mine doesn't look as fancy but we're getting somewhere lol)
34 parts
Similar boards
- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers161.3 × 263.9 mm

DSP 1.1
Owen-Patrick/SoftSynthetics-DSP
Hardware for adapting Karaoke DSP board to eurorack
115 parts10 - 2 layers67.3 × 74.5 mm

- 2 layers242.5 × 102.5 mm

- 4 layers20 × 120 mm

- 2 layers20 × 50 mm

NoiseGen
Sonosus/NoiseGen
This is a pink/white noise generator PCB that uses the Electric Druid NOISE2 chip. It is powered with +-12v and is perfect for use in compact synths.
15 parts5CC-BY-SA-4.0 - 2 layers98 × 98 mm

VCDO
Sonosus/VCDO
A Kosmo oscillator module that uses the Electric Druid VCDO chip.
93 parts4CC-BY-SA-4.0 - 2 layers50 × 110 mm

Ogham merged v1.0
keeos-io/ogham
Ogham — a dual-voice bytebeat synthesizer for Eurorack. Firmware (MIT) and hardware (CC BY-SA 4.0).
109 parts3
Questions
How big is the V1permodsynth PCB?
It measures 86 × 38.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the V1permodsynth use?
28 parts, built around the TL072 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the V1permodsynth KiCad files?
From the v1peridae/v1permodsynth repository on GitHub, at the commit this page was made from: the board is ar/ar/ar.kicad_pcb and its schematic ar/ar/ar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the V1permodsynth design in my own project?
Its repository states no licence, so its author keeps all rights: ask v1peridae before reusing the design.