

HS-2 Solenoid Break
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 7
- Pads
- 16
- Tracks, vias
- 56, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Feb 2021
- Updated
- 17 Feb 2021
Overview
HS-2 Solenoid Break is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/Solenoid-System- repository on GitHub, published under the MIT licence. It is a 2-layer board with 8 parts on 7 nets, routed with 56 tracks and 0 vias.
Its parts include 3 resistors, 3 connectors, 1 diode and 1 transistor.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Screw_Terminal_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J3, J4 |
| 1 | 1000 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 68 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | BUZ11 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | Screw_Terminal_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
What parts does the HS-2 Solenoid Break use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HS-2 Solenoid Break KiCad files?
From the UWCubeSat/Solenoid-System- repository on GitHub, at the commit this page was made from: the board is HS-2 Solenoid Break/HS-2 Solenoid Break.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HS-2 Solenoid Break design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).