
Spaceduino
UWCubeSat/minimee-electronics
KiCAD files for the MiniMEE mission, adapted from BONK

KiCAD files for the MiniMEE mission, adapted from BONK
Containment simple is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/minimee-electronics repository on GitHub, published under the MIT licence. It is a 2-layer board with 61 parts on 42 nets, routed with 458 tracks and 21 vias.
It is built around the LM358, PCA9557D and TMP411AD, with the TLP175A, LM339 and BSS84 among its other parts. Its parts include 20 resistors, 8 ICs, 7 diodes, 6 capacitors and 6 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R6, R7, R8, R9, R12, R14, R15, R16, R17, R19, R20 |
| 7 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | JEXP1, JPUMP1, JPUMP2, JSOL1, JSOL2, JSOL3, JTEMP1 |
| 5 | .1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5, C6 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R5 |
| 4 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D5, D7, D9 |
| 4 | MountingHole_Pad | Containment:MountingHole_2-56_ExtraClearance | H1, H2, H3, H4 |
| 3 | D | Diode_SMD:D_SOD-323F | D4, D6, D8 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 50 | Resistor_SMD:R_0603_1608Metric | R13, R18 |
| 2 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | JFLUID1, JFLUID2 |
| 2 | MCP4725xxx-xCH | Package_TO_SOT_SMD:SOT-23-6 | U7, U8 |
| 2 | TLP175A | Package_SO:MFSOP6-4_4.4x3.6mm_P1.27mm | U3, U4 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | LM339 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | PCA9557 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | TMP411 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U1 |

UWCubeSat/minimee-electronics
KiCAD files for the MiniMEE mission, adapted from BONK



Vakon84/lts74x
Lts74x was inspired by the following propjects: Integrated circuit tester: https://github.com/Johnlon/integrated-circuit-tester Smart IC Tester: https://github.com/akshaybaweja/Smart-IC-Tester


stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.

giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…

Formula-Trinity/bspd
A safety device which detects hard braking and acceleration and shuts the engine down.

61 parts, built around the LM358, PCA9557D, TMP411AD and TLP175A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UWCubeSat/minimee-electronics repository on GitHub, at the commit this page was made from: the board is containment/containment-simple.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).