

HYDRA: HuskY Deterministic Real-time Avionics PCB
- Size
- 95.9 × 90.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 90
- Pads
- 218
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Feb 2024
- Updated
- 6 Apr 2024
Overview
Hydra is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/hydra-board repository on GitHub. It is a 4-layer board of 95.9 × 90.2 mm with 37 parts on 90 nets.
It is built around the STM32L151RCT6, AMS1117-3.3 and USBLC6-2SC6. Its parts include 11 capacitors, 3 ICs, 3 connectors, 1 resistor and 1 diode. It belongs with the STM32 boards of this library.
Main components
3STM32L151RCT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 256KB 32 Bit 32KB 32MHz 51 8KB ARM Cortex-M3 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 3pF | Capacitor_SMD:C_0603_1608Metric | C1, C11 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 3V3_TP | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT1 TP | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | G*** | kibuzzard-65E19948 | kibuzzard-65E19948 |
| 1 | LOGO | mod:hsl | G*** |
| 1 | PC104 Interconnect | Connector_PinHeader_2.54mm:PinHeader_2x32_P2.54mm_Vertical | J2 |
| 1 | PSPI_MISO_TP | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | PSPI_MOSI_TP | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | PSPI_SCLK_TP | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Power LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RSPI_MISO_TP | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | RSPI_MOSI_TP | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | RSPI_SCLK_TP | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | SSPI_MISO_TP | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | SSPI_MOSI_TP | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SSPI_SCLK_TP | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | STM32L151RCT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J8 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers352.5 × 120 mm

PyKey87
jpconstantineau/PyKey60
The PyKey60 is a custom programmable mechanical keyboard with a standard ANSI 60% keyboard layout compatible with any cases made for the GH60. The PyKey60 uses mechanical switches (Cherry MX type).
310 parts57 - 4 layers135 × 82.5 mm

- 4 layers81.2 × 81.2 mm

- 4 layers66.4 × 66.4 mm

Rera
fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.
140 parts34GPL-3.0 - 2 layers51 × 71 mm

- 4 layers21.7 × 89.8 mm

- 2 layers69.6 × 37.3 mm

Controller
purdeaandrei/overnumpad_controller_1xb
An open source replacement keyboard controller for 4th generation IBM/Lexmark keyboards, and for some Unicomp keyboards
65 parts27
Questions
How big is the Hydra PCB?
It measures 95.9 × 90.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hydra use?
37 parts, built around the STM32L151RCT6, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hydra KiCad files?
From the UWCubeSat/hydra-board repository on GitHub, at the commit this page was made from: the board is hydra.kicad_pcb and its schematic hydra.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hydra design in my own project?
Its repository states no licence, so its author keeps all rights: ask UWCubeSat before reusing the design.