

Containment simple
KiCAD files for the BONK schematics and PCBs
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 29
- Pads
- 94
- Tracks, vias
- 134, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Aug 2020
- Updated
- 20 Dec 2020
Overview
Containment simple is an open-source printed circuit board by UWCubeSat, from the UWCubeSat/bonk-electronics repository on GitHub, published under the MIT licence. It is a 2-layer board with 33 parts on 29 nets, routed with 134 tracks and 3 vias.
It is built around the PCA9557D, TMP411AD and BSS84. Its parts include 9 diodes, 7 connectors, 5 resistors, 4 transistors and 2 capacitors.
Main components
3PCA9557D
SOIC-16-40℃~+85℃ 10mA 1uA 2.3V~5.5V 25mA 4.1V 400kHz 700mV 8 8 I2C、SMBus No Interrupt Output Push-Pull、Open-drain Reset function、Cascade and address expansion、Built-in LED driver SOIC-16 I/O Expanders ROHSTexas InstrumentsI/O ExpandersTMP411AD
SOIC-8-40℃~+125℃ 10uA 125ms 12bit 2.7V~5.5V I2C、SMBus ±1℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature SensorsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5, J6, JPUMP1, JTEMP1 |
| 5 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5 |
| 5 | LED | LED_SMD:LED_1206_3216Metric | D1, D3, D5, D7, D9 |
| 4 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | D | Diode_SMD:D_SOD-123 | D2, D4, D6, D8 |
| 4 | MountingHole_Pad | Containment:MountingHole_2-56_ExtraClearance | H1, H2, H3, H4 |
| 1 | .1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | PCA9557 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | TMP411 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
More from UWCubeSat/bonk-electronics
2- 2 layers69 × 69 mm

- 2 layers

Similar boards
- 2 layers

Containment simple
UWCubeSat/minimee-electronics
KiCAD files for the MiniMEE mission, adapted from BONK
61 parts1MIT - 2 layers49.6 × 49.6 mm

- 2 layers85.1 × 67.3 mm

Lts74x
Vakon84/lts74x
Lts74x was inspired by the following propjects: Integrated circuit tester: https://github.com/Johnlon/integrated-circuit-tester Smart IC Tester: https://github.com/akshaybaweja/Smart-IC-Tester
75 partsMIT - 4 layers120 × 75 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers44.2 × 29.3 mm

- 2 layers45 × 58.2 mm

- 2 layers98.5 × 59.8 mm

Neuron
giant-axon/lu.i-neuron-pcb
Lu.i is an electronic neuron circuit mimicking and illustrating the basic dynamics of real, biological neurons. The printed circuit board (PCB) features a configurable, fully analog implementation of the leaky…
90 parts73CERN-OHL-S-2.0
Questions
What parts does the Containment simple use?
33 parts, built around the PCA9557D, TMP411AD and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Containment simple KiCad files?
From the UWCubeSat/bonk-electronics repository on GitHub, at the commit this page was made from: the board is containment-dummy-experiment/containment-simple.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Containment simple design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).