Skip to the content
2 layers8.1 × 25 mmSensorBar, the printed circuit board in 3D
Size
8.1 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
12
Pads
53
Tracks, vias
124, 13
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Aug 2023
Updated
25 Jun 2026

Overview

SensorBar is an open-source printed circuit board by uw-x, from the uw-x/AcousticSwarms-Robots repository on GitHub. It is a 2-layer board of 8.1 × 25 mm with 22 parts on 12 nets, routed with 124 tracks and 13 vias.

It is built around the GP2S700HCP and LM293QT. Its parts include 9 resistors, 4 capacitors, 3 ICs and 1 transistor.

Main components

2

README

README.md

Hardware

The hardware design for the robots used in the acoustic swarms, including the circuits and PCB files.

Firmware

This subfolder contains the source code for the firmware we upload on the robots. The firmware is compiled and uploaded using Segger Embedded Studio v7.22 and the nRF5 SDK v17.0.1.

Receiver

This subfolder contains the source code and firmware for the receiver used to transmit data to and from the robot swarm. It also contains the 2D robot localization algorithm.

Parts

22
QtyValueFootprintReferences
3100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C3
310kResistor_SMD:R_0402_1005MetricR6, R7, R8
2100Resistor_SMD:R_0402_1005MetricR2, R4
230kResistor_SMD:R_0402_1005MetricR3, R5
2GP2S700HCPAcousticSwarm:GP2S700HCPU1, U2
110uFCapacitor_SMD:C_0402_1005MetricC4
11kResistor_SMD:R_0402_1005MetricR1
1ENATestPoint:TestPoint_Pad_D1.0mmTP4
1GNDTestPoint:TestPoint_Pad_D1.0mmTP5
1LM293QTPackage_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mmU3
1O1TestPoint:TestPoint_Pad_D1.0mmTP2
1O2TestPoint:TestPoint_Pad_D1.0mmTP3
1Q_NPN_BECPackage_TO_SOT_SMD:SOT-23Q1
1VCCTestPoint:TestPoint_Pad_D1.0mmTP1
1dnpResistor_SMD:R_0402_1005MetricR9

More from uw-x/AcousticSwarms-Robots

1
  • 2 layers6.7 × 6.7 mmGyroHat, the printed circuit board in 3D

    GyroHat

    uw-x/AcousticSwarms-Robots

    12 parts14

Similar boards

  • 6 layers17.2 × 35.4 mmOshEasyMini, the printed circuit board in 3D

    OshEasyMini

    Kev1n8088/OshEasyMini

    124 parts
  • 4 layers30 × 80 mmOshTelemega, the printed circuit board in 3D

    OshTelemega

    Kev1n8088/OshTelemega

    The Mega3080 FCU is an evolved clone of the Altus Metrum Telemega. Using the same firmware (meaning the same sensor suite), the primary developments are: - USB-C - Wago style spring terminals - Better GPS RF routing…

    166 parts
  • 2 layers65 × 56 mmLab1-v2, the printed circuit board in 3D

    Lab1-v2

    Astrak00/Spring25

    13 parts
  • 2 layers46 × 69.5 mmPannel, the printed circuit board in 3D

    Pannel

    atuleu/aristeus

    Yet another Open Source Hardware Apiary project for monitoring bees.

    108 partsCERN-OHL-S-2.0
  • 2 layersRelay, the printed circuit board in 3D

    Relay

    Memetrans/rele

    rele wifi

    43 parts
  • 2 layers90.9 × 50.9 mmRokisi sensor, the printed circuit board in 3D

    Rokisi sensor

    mdumas2/rokisi

    49 partsBSD-3-Clause
  • 2 layers150 × 100 mmLancer sensor bwv2, the printed circuit board in 3D

    Lancer sensor bwv2

    shimotoriharuki/2018_RobotLancer_kicad

    72 partsMIT

Questions

How big is the SensorBar PCB?

It measures 8.1 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SensorBar use?

22 parts, built around the GP2S700HCP and LM293QT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SensorBar KiCad files?

From the uw-x/AcousticSwarms-Robots repository on GitHub, at the commit this page was made from: the board is Hardware/SensorBar/SensorBar.kicad_pcb and its schematic Hardware/GyroHat/GyroHat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SensorBar design in my own project?

Its repository states no licence, so its author keeps all rights: ask uw-x before reusing the design.