Skip to the content
2 layers25.4 × 34.3 mmLight Pcb, the printed circuit board in 3D

Under this folder are organized locations for all the .stl files used to create the various printed elements.

Size
25.4 × 34.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
11
Pads
26
Tracks, vias
35, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 Oct 2023
Updated
5 Sep 2024

Overview

Light Pcb is an open-source printed circuit board by UVMAirLabTrack, from the UVMAirLabTrack/Track23 repository on GitHub. It is a 2-layer board of 25.4 × 34.3 mm with 11 parts on 11 nets, routed with 35 tracks and 0 vias.

Its parts include 5 resistors, 5 diodes and 1 connector.

README

README.md

UVM SEED 2023 Track

Repository for code and setup files associated with the 2023 UVM SEED Project for an urban track for autonomous cars

File Structure

A. Documentation

Look in here to find the detailed instructions on how to build and run the track system. As well as more in depth information as to the system's function

3D modelling

Under this folder are organized locations for all the .stl files used to create the various printed elements.

Interactive Elements

Here you will find the Arduino IDE code files used for the ESP32 interactive element network. Additionally Kicad format PCB's and schematics are located here. The receiver for each interactive element utilizes the same PCB, with 4 RJ45 connectors and a single ESP32 Dev Module with 38 pins (WROOM- D or E) The only change is which code file is flashed.

Some previous versions utilizing pure serial connections have been left for adapability. The latest track build utilizes:

  1. Stoplight
    • ESPnow_4way_4int.ino
    • ESP_now_3Way.ino
  2. Train Crossing
    • ESPNowTrain_Complete.ino
  3. Sender
    • ESPnowSender.ino

With the sender node being connected via serial to the computer controlling the track, In this case a Raspberry Pi 4B 8GB model.

CoreRaspbery

is the ROS2 Workspace,

at present the code is designed to build into a Humble distro, however in testing the code can also be built for a Foxy distro.

Setup Files

contains some basic files to aid in deploying the Raspberry Pi track computer

Car commands

is a curated list of the terminal commands needed to operate specific functions of the Yahboom R2 car Also contained within are some quality of life improvements to the deployment of the docker environment on the car, just some simple .sh files.

Other Code

A series of files not directly part of the track functionality. Mostly a series of HSV decoders and Webcam Capture files

files not in a folder

the Dockerfiles in the main directory are intended to build a docker container to run all the ROS code, this is not intended for deployment on the PI as of this moment, instead it is intended as a complete package for the vizualizer node(s). At present, windows communication via WiFi is not functional due to additional networking constraints.

Parts

11
QtyValueFootprintReferences
5100Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5
1LED_blueLED_THT:LED_D5.0mm_ClearD4
1LED_greenLED_THT:LED_D5.0mm_ClearD3
1LED_redLED_THT:LED_D5.0mm_ClearD1
1LED_whiteLED_THT:LED_D5.0mm_ClearD5
1LED_yelLED_THT:LED_D5.0mm_ClearD2
1Screw_Terminal_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1

More from UVMAirLabTrack/Track23

3
  • 2 layers25.4 × 51 mmLight Pcb, the printed circuit board in 3D

    Light Pcb

    UVMAirLabTrack/Track23

    Under this folder are organized locations for all the .stl files used to create the various printed elements.

    11 parts
  • 2 layers31 × 27 mmServo Adapt, the printed circuit board in 3D

    Servo Adapt

    UVMAirLabTrack/Track23

    Under this folder are organized locations for all the .stl files used to create the various printed elements.

    11 parts
  • 2 layers86.4 × 52.1 mmEsp Controller, the printed circuit board in 3D

    Esp Controller

    UVMAirLabTrack/Track23

    Under this folder are organized locations for all the .stl files used to create the various printed elements.

    5 parts

Similar boards

  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0
  • 2 layers47 × 33 mmSevensegment led display module, the printed circuit board in 3D

    Sevensegment led display module

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    11 parts803MIT
  • 2 layers42.5 × 36.8 mmDevboard, the printed circuit board in 3D

    Devboard

    basilfx/TRADFRI-Hacking

    Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.

    11 parts743CC-BY-4.0

Questions

How big is the Light Pcb PCB?

It measures 25.4 × 34.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Light Pcb use?

11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Light Pcb KiCad files?

From the UVMAirLabTrack/Track23 repository on GitHub, at the commit this page was made from: the board is InteractiveElements/Board Design and IO/Light Pcb/Light Pcb.kicad_pcb and its schematic InteractiveElements/Board Design and IO/Esp Controller/Esp Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Light Pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask UVMAirLabTrack before reusing the design.