Skip to the content
4 layers100 × 60 mmBez controller1v5, the printed circuit board in 3D

PCB designs

Size
100 × 60 mm
Copper layers
4
Thickness
4.69 mm
Parts
67
Nets
79
Pads
261
Tracks, vias
552, 43
Pours
7
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Feb 2018
Updated
27 Jun 2026

Overview

Bez controller1v5 is an open-source printed circuit board by utra-robosoccer, from the utra-robosoccer/soccer-pcb repository on GitHub. It is a 4-layer board of 100 × 60 mm with 67 parts on 79 nets, routed with 552 tracks and 43 vias.

It is built around the 74LVC2G241GS and USBLC6-4SC6. Its parts include 25 capacitors, 12 connectors, 11 ICs, 9 resistors and 2 diodes. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

soccer-pcb

PCB designs for UTRA Robosoccer Team

Software used:

  • Autodesk Eagle
  • KiCad 6.0
  • KiCad 9.0 (since Sept. 2025)

Parts

67
QtyValueFootprintReferences
140.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6, C9, C11, C14, C15, C16, C17, C18, C22
710kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5, R6, R8
674LVC2G241Package_SO:VSSOP-8_3.0x3.0mm_P0.65mmU1, U2, U3, U4, U5, U6
6Conn_01x03_MaleConnector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_VerticalJ1, J2, J3, J4, J5, J6
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
210uFCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC12, C13
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR7, R9
21uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC20, C21
220pFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC24, C25
230R/1.8AInductor_THT:L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1FB1, FB2
2Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7, J11
110nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC19
110uF/50VCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC7
12.2uF electrolyticCapacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mmC10
122uF/16VCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC8
14.7uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC23
18MHzCrystal:Crystal_HC49-U_VerticalY1
1GREENLED_THT:LED_D5.0mm_ClearD2
1IMU Conn_01x08_FemaleConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ8
1JTAG Conn_01x06_MaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ9
1LD1117AS33TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U9
1LF50ABV_TO220Package_TO_SOT_THT:TO-220-3_VerticalU8
1LOGOLOGOG***
1PX07806-500-SPackage_TO_SOT_THT:TO-220F-3_VerticalU7
1REDLED_THT:LED_D5.0mm_ClearD1
1STM32F446RETxPackage_QFP:LQFP-64_10x10mm_P0.5mmU11
1Screw_Terminal_01x02Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_HorizontalJ10
1USBLC6-4SC6Package_TO_SOT_SMD:SOT-23-6U10
1USB_B_MiniConnector_USB:USB_Micro-B_Molex-105017-0001J12

Similar boards

  • 4 layers100 × 74 mmBeaglelogic standalone, the printed circuit board in 3D

    Beaglelogic standalone

    abhishek-kakkar/beaglelogic-standalone

    BeagleLogic implemented as a turnkey and standalone logic analyzer

    260 parts15
  • 2 layers65 × 56 mmLARA hat, the printed circuit board in 3D

    LARA hat

    LuHer10/LARA

    LARA: Low-cost Assistive Robot Arm

    33 parts1
  • 4 layers90 × 51.4 mmCharge bay, the printed circuit board in 3D

    Charge bay

    daveismith/charge-bay

    111 parts
  • 2 layers68.6 × 53.3 mmTophat, the printed circuit board in 3D

    Tophat

    dbd/AdafruitMetroESP32-DynamixelHat

    A HAT designed for the AdaFruit Metro ESP32-S3 to communicate with Dynamixel servos using this library

    26 parts
  • 2 layers85 × 56 mmLara hat v2, the printed circuit board in 3D

    Lara hat v2

    LuHer10/LARA_V2

    First flash the latest Raspberry Pi OS image to your preferred storage device. The official Raspberry Pi Imager can be used for that.

    31 parts
  • 4 layers48.3 × 52.9 mmDynaButton, the printed circuit board in 3D

    DynaButton

    manhoosbilli1/dynaboard-button-controller

    Dynaboard - large button/control interface board (102 syms, 590 tracks)

    68 parts
  • 4 layers52.3 × 30 mmHds rpi, the printed circuit board in 3D

    Hds rpi

    v-r-a/Kondo_KRS_RPi

    A linux library for Raspberry Pi to operate the KRS motors (Kondo humanoid) using GPIO UART ports. Unoffocial library based on Kondo's Arduino ICS library for KRS motors.

    56 partsMIT
  • 4 layers105.3 × 66.2 mmMolenet V6.1 26 09 24, the printed circuit board in 3D

    Molenet V6.1 26 09 24

    ComNets-Bremen/MoleNet

    MoleNet: A Wireless Underground Sensor Network platform

    70 parts13GPL-3.0

Questions

How big is the Bez controller1v5 PCB?

It measures 100 × 60 mm and has 4 copper layers, 4.69 mm thick.

What parts does the Bez controller1v5 use?

67 parts, built around the 74LVC2G241GS and USBLC6-4SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bez controller1v5 KiCad files?

From the utra-robosoccer/soccer-pcb repository on GitHub, at the commit this page was made from: the board is bez_controller1v5/bez_controller1v5.kicad_pcb and its schematic NUCLEO_F446_BREAK/NUCLEO_F446_BREAK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bez controller1v5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask utra-robosoccer before reusing the design.