
PowerMeterBreakout
utahrobotics/PowerDistributionBoard2017
The power distribution board for the robot.

The power distribution board for the robot.
TinaPDB 81x124mm is an open-source printed circuit board by utahrobotics, from the utahrobotics/PowerDistributionBoard2017 repository on GitHub. It is a 2-layer board of 124.9 × 81.6 mm with 28 parts on 9 nets.
Its parts include 19 connectors, 4 diodes, 2 resistors, 2 switches and 1 fuse.
The power distribution board for the robot.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 750 | Resistors_SMD:R_1206_HandSoldering | R1, R2 |
| 2 | D | Diodes_SMD:D_SMA_Handsoldering | D3, D4 |
| 2 | FINDER-36.11-4301 | PDB17:Relay_Through_Hole | K1, K2 |
| 1 | Aux 1 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J5 |
| 1 | Aux 2 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J6 |
| 1 | Aux 3 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J7 |
| 1 | Bucket 1 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J16 |
| 1 | Bucket 2 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J17 |
| 1 | Conn_02x02_Counter_Clockwise | Connectors_Molex:Molex_MegaFit_2x02x5.70mm_Angled | J19 |
| 1 | Digger 1 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J14 |
| 1 | Digger 2 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J15 |
| 1 | Drive 1 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J10 |
| 1 | Drive 2 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J11 |
| 1 | Drive 3 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J12 |
| 1 | Drive 4 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J13 |
| 1 | Fuse | PDB17:ATC_Fuse_Holder | F1 |
| 1 | IMU | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J2 |
| 1 | JM Button | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J9 |
| 1 | Localization | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J3 |
| 1 | MAux 1 | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J18 |
| 1 | Main Button | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J8 |
| 1 | Main Computer (Jetson) | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J1 |
| 1 | Main PWR LED | LEDs:LED_1206_HandSoldering | D1 |
| 1 | Second Computer | Connectors_Molex:Molex_MegaFit_2x01x5.70mm_Angled | J4 |
| 1 | Second PWR LED | LEDs:LED_1206_HandSoldering | D2 |

utahrobotics/PowerDistributionBoard2017
The power distribution board for the robot.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
It measures 124.9 × 81.6 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the utahrobotics/PowerDistributionBoard2017 repository on GitHub, at the commit this page was made from: the board is TinaPDB_81x124mm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask utahrobotics before reusing the design.