

NG IMU Shield Board
Teensy 4.0 Shield Board for NG IMU
- Size
- 87.6 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 46
- Pads
- 104
- Tracks, vias
- 77, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 May 2022
- Updated
- 2 Jun 2022
Overview
NG IMU Shield Board is an open-source printed circuit board by utahrobotics, from the utahrobotics/NG_IMU_Shield_Board repository on GitHub. It is a 2-layer board of 87.6 × 45.7 mm with 21 parts on 46 nets, routed with 77 tracks and 0 vias.
It is built around the LM393. Its parts include 8 resistors, 5 connectors, 3 ICs, 2 capacitors and 2 diodes. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 720 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R5, R6, R8 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | 130 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R7 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10_Female | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Conn_01x11_Male | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J6 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LED_RBAG | LED_THT:LED_D5.0mm-4_RGB | D2 |
| 1 | LM393 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LOGO | NG_IMU_footprints:USR_small | G*** |
| 1 | Level_Converter | NG_IMU_footprints:Level_Converter | U2 |
| 1 | Teensy_v4.0 | NG_IMU_footprints:Teensy4.0 | U3 |
Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers130 × 80 mm

- 2 layers100 × 85 mm

- 4 layers292.1 × 88.3 mm

Snark barker mca
schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
177 parts69 - 2 layers133 × 98 mm

Precharge
michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)
121 parts59MIT - 4 layers285.1 × 48.1 mm

Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 4 layers72.4 × 44.4 mm

Btmdpcb v04 eval
17o2/bluetooth-minidisc
Adding built-in bluetooth connectivity to a 20-year-old Mindisc player
115 parts45 - 2 layers29 × 27 mm

USB C-3-way splitter V5
bluepylons/USB-C-3-way-splitter
A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
39 parts40MIT
Questions
How big is the NG IMU Shield Board PCB?
It measures 87.6 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NG IMU Shield Board use?
21 parts, built around the LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NG IMU Shield Board KiCad files?
From the utahrobotics/NG_IMU_Shield_Board repository on GitHub, at the commit this page was made from: the board is NG_IMU_Shield_Board/NG_IMU_Shield_Board.kicad_pcb and its schematic NG_IMU_Shield_Board/NG_IMU_Shield_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NG IMU Shield Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask utahrobotics before reusing the design.