
Motor
ut-ras/Region-5-2017-2018
The University of Texas at Austin team for the 2018 IEEE Region V Robotics Competition

The University of Texas at Austin team for the 2018 IEEE Region V Robotics Competition
Primary is an open-source printed circuit board by ut-ras, from the ut-ras/Region-5-2017-2018 repository on GitHub. It is a 2-layer board of 104.1 × 53.3 mm with 31 parts on 93 nets, routed with 79 tracks and 0 vias.
Its parts include 26 connectors, 1 resistor, 1 diode, 1 transistor and 1 switch.
Drive System
Line Following and Intersection Detection
Token Control and Storage
Field Mapping, Data Logging, and Debugging
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | CONN_01X01 | Socket_Arduino_Mega:Arduino_1pin | P8, P9, P10, P11, P12, P13 |
| 2 | Analog | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P3, P4 |
| 1 | 1N914 | Diodes_THT:D_DO-15_P5.08mm_Vertical_KathodeUp | D1 |
| 1 | 220 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R1 |
| 1 | Battery | Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mm | J12 |
| 1 | Communication | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P7 |
| 1 | Digital | Socket_Arduino_Mega:Socket_Strip_Arduino_2x18 | P1 |
| 1 | I2C Bus | Connectors_Samtec:SL-104-X-XX_1x04 | J11 |
| 1 | LOGO | RAS:Logo | G*** |
| 1 | Line Sensor 1 | Connectors_Samtec:SL-103-X-XX_1x03 | J1 |
| 1 | Line Sensor 2 | Connectors_Samtec:SL-103-X-XX_1x03 | J2 |
| 1 | Line Sensor 3 | Connectors_Samtec:SL-103-X-XX_1x03 | J3 |
| 1 | Line Sensor 4 | Connectors_Samtec:SL-103-X-XX_1x03 | J4 |
| 1 | Line Sensor 5 | Connectors_Samtec:SL-103-X-XX_1x03 | J5 |
| 1 | Line Sensor 6 | Connectors_Samtec:SL-103-X-XX_1x03 | J6 |
| 1 | Magnet | Connectors_Samtec:SL-102-X-XX_1x02 | J14 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x10 | P5 |
| 1 | PWM | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P6 |
| 1 | Pololu_D24V50F5 | Pololu:Pololu_D24V50F5 | J13 |
| 1 | Pololu_DRV8834 | Pololu:Pololu_DRV8834 | J8 |
| 1 | Power | Socket_Arduino_Mega:Socket_Strip_Arduino_1x08 | P2 |
| 1 | Q_NPN_BCE | TO_SOT_Packages_THT:TO-18-3 | Q1 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW1 |
| 1 | Servo | Connectors_Samtec:SL-103-X-XX_1x03 | J7 |
| 1 | Stepper Motor | Connectors_Samtec:SL-104-X-XX_1x04 | J9 |

ut-ras/Region-5-2017-2018
The University of Texas at Austin team for the 2018 IEEE Region V Robotics Competition

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.


It measures 104.1 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ut-ras/Region-5-2017-2018 repository on GitHub, at the commit this page was made from: the board is electronics/pcbs/Primary/Primary.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ut-ras before reusing the design.