2 layers100 × 100 mm
PIDController - Copy - Copy
rherzal/AnalogPIDController
The project is a full design and implementation of an analog PID controller pcb, using only operational amplifiers for calculations, used to control a DC motor.
26 parts1
2 layers
Replace a door intercom system with a Raspberry Pi.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 38
- Pads
- 86
- Tracks, vias
- 124, 34
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Nov 2017
- Updated
- 11 Nov 2021
Overview
Tuer is an open-source printed circuit board by User65k, from the User65k/DoorBerryHat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 25 parts on 38 nets, routed with 124 tracks and 34 vias.
It is built around the BD433. Its parts include 8 connectors, 5 resistors, 3 transistors, 2 capacitors and 1 switch.
Main components
1README
README.mdDoorBerry
Use a Raspberry Pi as a VoIP door intercom system.
I use it with my FritzBox to alert all my DECT Phones. Tested on a Pi 2B+ and a Pi Zero with raspbian (and mono).
Software
Please find it here.
Hardware
All Files are creaded with KiCad.
Old Door system
The new System replaces the indoor part of a RITTO intercom system. The Door itself and the other appartments where not modified.
The old system had a fairly simple circut:
New Door Intercom
The system is replaced by a Raspberry with a custum Hat (utilizing the GPIOs of the Pi). Bell and Buzzer can operate independently from the new system (in case of Network errors, Bugs, :speak_no_evil:).
The switch (SW1) can open the door regardless of any errors in the Pi.
The speaker (SP1) will notify about someone ringing the Bell independently from the Pi.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistors_ThroughHole:Resistor_Vertical_RM5mm | R4, R5 |
| 2 | 10uF | Capacitors_ThroughHole:C_Radial_D5_L6_P2.5 | C1, C2 |
| 2 | Q_PMOS_GDS | Pin_Headers:Pin_Header_Straight_1x03 | Q2, Q3 |
| 1 | 263 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R1 |
| 1 | 56 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 56 | Resistors_ThroughHole:Resistor_Horizontal_RM15mm | R3 |
| 1 | BD433 | Pin_Headers:Pin_Header_Straight_1x03 | Q1 |
| 1 | Blau | Pin_Headers:Pin_Header_Straight_1x01 | P2 |
| 1 | Braun | Pin_Headers:Pin_Header_Straight_1x01 | P3 |
| 1 | IsRing | Housings_DIP:DIP-4_W7.62mm | KB817 |
| 1 | Orange | Pin_Headers:Pin_Header_Straight_1x01 | P6 |
| 1 | Rasp17_36 | Socket_Strips:Socket_Strip_Straight_2x10 | P1 |
| 1 | Rot | Pin_Headers:Pin_Header_Straight_1x01 | P5 |
| 1 | SPEAKER | Buzzers_Beepers:BUZZER | SP1 |
| 1 | SWOpenDoor | Housings_DIP:DIP-6_W7.62mm | 4N32 |
| 1 | SWRot | Housings_DIP:DIP-6_W7.62mm | 4N32_2 |
| 1 | SWWeis | Housings_DIP:DIP-6_W7.62mm | 4N32_3 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH | SW1 |
| 1 | Sound Out | Connect:BARREL_JACK | CON1 |
| 1 | Speach In | Connect:BARREL_JACK | CON2 |
| 1 | Weis | Pin_Headers:Pin_Header_Straight_1x01 | P4 |
| 1 | isOpen | Housings_DIP:DIP-6_W7.62mm | 4N2x1 |
Questions
What parts does the Tuer use?
25 parts, built around the BD433. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tuer KiCad files?
From the User65k/DoorBerryHat repository on GitHub, at the commit this page was made from: the board is Tuer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tuer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers78 × 58 mm
HAT
ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries
41 parts2 - 2 layers159.5 × 30 mm
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0 - 2 layers113.5 × 95.1 mm
Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
25 parts2.1k - 2 layers75 × 30 mm
- 2 layers58.4 × 114.3 mm
PicoPedal
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
25 parts915 - 2 layers54 × 15 mm
Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 2 layers50 × 76 mm
