
Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!

UWABA is an open-source printed circuit board by uSANMA, from the uSANMA/pcb-uwaba-prototype repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 73 × 79 mm with 123 parts on 111 nets, routed with 903 tracks and 142 vias.
It is built around the ESP32-S3-WROOM-1U-N8R2, LM358QT and TPS54360BDDAR, with the ADG884BRMZ-REEL7, IRF8714TRPBF and AMS1117-3.3 among its other parts. Its parts include 40 resistors, 28 capacitors, 23 connectors, 12 ICs and 9 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C6, C7, C8, C9, C10, C12, C15, C18, C19, C24, C26, C27 |
| 12 | 10kR | Resistor_SMD:R_0805_2012Metric | R15, R18, R19, R20, R21, R22, R24, R26, R27, R28, R33, R34 |
| 6 | 1kR | Resistor_SMD:R_0805_2012Metric | R2, R5, R29, R32, R35, R38 |
| 4 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5 |
| 4 | DY-ITR20001 | PAD:PAD-01x02-2.54mm | D6, D7, Q1, Q2 |
| 4 | TH1 | PAD:PAD-01x02-2.54mm | J2, J3, J4, J5 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C23, C25, C28 |
| 3 | 18.7R | Resistor_SMD:R_2512_6332Metric | R8, R9, R10 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C11, C22 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R11, R12 |
| 2 | 10kR | 3266W-1-103:3266W1103 | VR1, VR2 |
| 2 | 120R | Resistor_SMD:R_0805_2012Metric | R23, R25 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C17, C21 |
| 2 | 220kR | Resistor_SMD:R_0805_2012Metric | R30, R36 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C13, C20 |
| 2 | 4.7kR | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 510R | Resistor_SMD:R_0805_2012Metric | R31, R37 |
| 2 | ADG884BRMZ-REEL7 | ADG884BRMZ-REEL7:SOP50P490X110-10N | IC6, IC7 |
| 2 | IRF8714TRPBF | IRF8714TRPBF:SOIC127P600X175-8N | IC1, IC2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R39, R40 |
| 2 | SKRPACE010 | SKRPACE010:SMT(4.2X3.2) | S1, S2 |
| 1 | 0.7v | Diode_SMD:D_SMB | D2 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 11.7kR | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 14.7kR | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 147kR | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 36.5kR | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 38.3R | Resistor_SMD:R_1210_3225Metric | R7 |
| 1 | 5mR | Resistor_SMD:R_2512_6332Metric | R6 |
| 1 | 8.2pF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 8.2uH | SRN8040-8R2Y:SRN80408R2Y | L1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BMI323 | BMI323:BMI323 | IC5 |
| 1 | BSMD1812 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | BSS84DW-7-F | BSS84DW-7-F:SOT65P210X100-6N | Q3 |
| 1 | BUCK3_In | PAD:PAD-01x02-4mm | J11 |
| 1 | BUCK3_Out | PAD:PAD-01x02-4mm | J12 |
| 1 | Bateria | PAD:PAD-01x05-Bateria4S | J1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J18 |
| 1 | DIR_PWM_SW2_CONTROLE | PAD:PAD-01x02-2.54mm | J21 |
| 1 | ESP32-S3-WROOM-1U-N8R2 | ESP32-S3-WROOM-1U-N8R2:ESP32S3WROOM1UN8R2 | U1 |
| 1 | FAN1_Vcc | PAD:PAD-01x02-2.54mm | J16 |
| 1 | FAN2_Vcc | PAD:PAD-01x02-2.54mm | J17 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J19 |
| 1 | GPS_UART | PAD:PAD-01x02-2.54mm | J10 |
| 1 | GPS_Vcc | PAD:PAD-01x02-2.54mm | J9 |
| 1 | LIDAR_UART | PAD:PAD-01x02-2.54mm | J8 |
| 1 | LIDAR_Vcc | PAD:PAD-01x02-2.54mm | J6 |
| 1 | LIDAR_Vcc_Motor | PAD:PAD-01x02-4mm | J7 |
| 1 | LM358QT | LM358QT:SON50P200X200X60-9N-D | IC4 |
| 1 | MAX17320G22+ | MAX17320G22+:QFN50P400X400X80-25N | U2 |
| 1 | PESD12VS2UT | Package_TO_SOT_SMD:SOT-23 | D5 |
| 1 | PONTEH_A | PAD:PAD-01x02-2.54mm | J14 |
| 1 | PONTEH_B | PAD:PAD-01x02-2.54mm | J15 |
| 1 | PONTEH_Vcc | PAD:PAD-01x02-4mm | J13 |
| 1 | PWM_RC_A | PAD:PAD-01x02-2.54mm | J22 |
| 1 | PWM_RC_B | PAD:PAD-01x02-2.54mm | J23 |
| 1 | PWM_SW1_CONTROLE | PAD:PAD-01x02-2.54mm | J20 |
| 1 | SD101BW-7-F | Diode_SMD:D_SOD-123 | D4 |
| 1 | SD103AWS | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | TPS54360BDDAR | TPS54360BDDAR:SOIC127P600X170-9N | IC3 |
| 1 | TPSP0504BAHTG | Package_TO_SOT_SMD:SOT-23-5 | D3 |
| 1 | ~ | LM2596-Modulo:LM2596-Modulo | U4 |
The 119 most common of 123 parts.
It measures 73 × 79 mm and has 2 copper layers, 1.6 mm thick.
123 parts, built around the ESP32-S3-WROOM-1U-N8R2, LM358QT, TPS54360BDDAR and ADG884BRMZ-REEL7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the uSANMA/pcb-uwaba-prototype repository on GitHub, at the commit this page was made from: the board is uWABA.kicad_pcb and its schematic uWABA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!




Gabrieleenx/Deformable_Tactile_Sensor
This is the material and guides for the paper "Deformable In-Hand Slip-Aware Tactile Sensor with Integrated Velocity Sensing, Force/Torque and Pressure Map Estimation".

MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it

