
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

The Keyboard of Mac JIS-layout lovers, by Mac JIS-layout lovers, for Mac JIS-layout lovers.
MJ65 is an open-source printed circuit board by urushiyama, from the urushiyama/MJ65-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 285.7 × 120 mm with 229 parts on 102 nets, routed with 2,339 tracks and 25 vias.
Its parts include 86 switches, 80 diodes and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 79 | DIODE | Keebio-Parts (fork):Diode-dual | D0_1, D0_2, D0_3, D0_4, D0_5, D0_6, D0_7, D0_8, D0_9, D0_10, D0_11, D0_12, D0_13, D0_14, D0_15, D1_0 +63 |
| 62 | MountingHole_2.2mm_M2_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H0, H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22 +46 |
| 57 | SW_Push | Keebio-Parts (fork):Triple_PCB_100H | SW0_1, SW0_2, SW0_3, SW0_4, SW0_5, SW0_6, SW0_7, SW0_8, SW0_9, SW0_10, SW0_11, SW0_12, SW0_13, SW0_14, SW0_15, SW1_10 +41 |
| 11 | SW_Push | Keebio-Parts (fork):Triple_PCB_100H-External-Switch-Pad | SW0_0, SW1_0, SW1_14, SW2_0, SW2_14, SW3_0, SW3_13, SW3_14, SW4_0, SW4_9, SW4_13 |
| 5 | SW_Push | Keebio-Parts (fork):Triple_PCB_150H | SW1_1, SW1_15, SW4_1, SW4_12, SW4_15 |
| 4 | SW_Push | Keebio-Parts (fork):Triple_PCB_175H | SW2_1, SW3_15, SW4_5, SW4_7 |
| 4 | SW_Push | Keebio-Parts (fork):Triple_PCB_125H | SW4_3, SW4_4, SW4_8, SW4_10 |
| 2 | SW_Push | Keebio-Parts (fork):Triple_PCB_225H | SW2_15_USEnt0, SW3_1 |
| 1 | Ada32u4 | Ada32u4:Ada32u4 | U0 |
| 1 | D | Keebio-Parts (fork):Diode-dual | D0_0 |
| 1 | SW_Push | Keebio-Parts (fork):Triple_PCB_625H-v-flip | SW4_6_USSp0 |
| 1 | SW_Push | Keebio-Parts (fork):Triple_PCB_200V | SW2_15 |
| 1 | SW_Push | Keebio-Parts (fork):Triple_PCB_275H-v-flip | SW3_15_USSft0 |

cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.




VectorLabsTechnology/Pegasus-Motor-Controller
Projeto de um inversor para um motor PMSM com FOC

nikolafilip/nibble
A 4-bit computer built from individual transistors, in public. No integrated circuits. AI-designed, hand-soldered.


It measures 285.7 × 120 mm and has 2 copper layers, 1.6 mm thick.
229 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the urushiyama/MJ65-PCB repository on GitHub, at the commit this page was made from: the board is MJ65.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).