

Photosensor
TSL1406RS mounting PCB for spectrophotometer
- Size
- 66 × 47.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 7
- Pads
- 32
- Tracks, vias
- 57, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 23 Jan 2013
- Updated
- 24 Jan 2013
Overview
Photosensor is an open-source printed circuit board by uprightsquire, from the uprightsquire/photoboard repository on GitHub. It is a 2-layer board of 66 × 47.1 mm with 8 parts on 7 nets, routed with 57 tracks and 0 vias.
It is built around the TSL1406R.
Main components
1README
README.mdKICAD PCB files for TSL1406R board
PCB to mount linear photodiode array and break out the pins into serial mode
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2.3mm_drill_hole | , | |
| 2 | 3mm_drill_hole | , | |
| 1 | 8mm_drill_hole | ||
| 1 | 104 | SM0805 | |
| 1 | 6PIN | 6Pin | |
| 1 | TSL1406R | TSL1406R |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Photosensor PCB?
It measures 66 × 47.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Photosensor use?
8 parts, built around the TSL1406R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Photosensor KiCad files?
From the uprightsquire/photoboard repository on GitHub, at the commit this page was made from: the board is photosensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Photosensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask uprightsquire before reusing the design.