2 layers100 × 100 mm
Main pcb hw5
herzmx/cartreader
A shield for the Arduino Mega that can back up video game cartridges.
31 parts2GPL-3.0
2 layers61.6 × 37.8 mm
WonderWitch
up-n-atom/WonderWitch13PTS-0101 Reproduction - Used in the WonderWitch, Judgement Silver Sword, Dicing Knight, and Tenori-On cartridges.
- Size
- 61.6 × 37.8 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 34
- Nets
- 80
- Pads
- 292
- Tracks, vias
- 1,413, 126
- Pours
- 241
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 May 2021
- Updated
- 5 Oct 2021
Overview
WonderWitch is an open-source printed circuit board by up-n-atom, from the up-n-atom/WonderWitch repository on GitHub. It is a 2-layer board of 61.6 × 37.8 mm with 34 parts on 80 nets, routed with 1,413 tracks and 126 vias.
It is built around the CR16160J. Its parts include 8 capacitors, 5 ICs, 2 resistors, 1 connector and 1 crystal.
Main components
1README
README.mdWonderWitch Reproduction
Schematic Capture
- Create symbols
- Block design
PCB Layout
- Create footprints
- Route top layer
- Route bottom layer
- Plane top layer
- Plane bottom layer
- Teardrop top layer
- Teardrop bottom layer
- Silkscreen top layer
Manufacturing Notes
- Do not plate slots and non-plated through-holes, ask fabricator to adjust keep-away. The original design was intended for electroplating and not electroless.
- Do not submit the incomplete silkscreen gerbers.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10nF | WonderWitch:0603 | C1, C3, C4, C7, C8 |
| 2 | 1uF | WonderWitch:0603 | C2, C5 |
| 2 | R103 | WonderWitch:0603 | R1, R2 |
| 1 | 3pF | WonderWitch:0603 | C6 |
| 1 | BANDAI2003 | WonderWitch:LQFP-48 | U3 |
| 1 | CMR200T | WonderWitch:WX2 | Y1 |
| 1 | CR1616 | WonderWitch:BTHLDR | BT1 |
| 1 | GIZA | WonderWitch:SOP-8 | U2 |
| 1 | MBM29DL400TC | WonderWitch:TSOP-I-48 | U1 |
| 1 | S3511A | WonderWitch:SSOP-8 | U5 |
| 1 | UPD442000A | WonderWitch:STSOP-32 | U4 |
| 1 | WSCE | WonderWitch:EDGE | J1 |
The 18 most common of 34 parts.
Similar boards
- 2 layers100 × 100 mm
Main pcb hw5
gemarcano/cartreader
A shield for the Arduino Mega that can back up video game cartridges.
31 partsGPL-3.0 - 2 layers51 × 30.8 mm
AGB E06-10
JimmehhW/AGB-E06-Replacement-PCB
Replacement PCB for damaged gameboy advance games using the AGB-E06 pcb
21 parts - 2 layers51 × 70 mm
- 2 layers51 × 60.7 mm
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k
Questions
How big is the WonderWitch PCB?
It measures 61.6 × 37.8 mm and has 2 copper layers, 1 mm thick.
What parts does the WonderWitch use?
34 parts, built around the CR16160J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WonderWitch KiCad files?
From the up-n-atom/WonderWitch repository on GitHub, at the commit this page was made from: the board is KiCad/WonderWitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WonderWitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask up-n-atom before reusing the design.