
Tiny dap
UnsicentificLaLaLaLa/tiny-dap
基于 TinyUSB 和 CMSIS-5 实现的 CMSIS-DAP,支持 SWD 调试接口和串口通信。

基于 TinyUSB 和 CMSIS-5 实现的 CMSIS-DAP,支持 SWD 调试接口和串口通信。
Tiny dap is an open-source printed circuit board by UnsicentificLaLaLaLa, from the UnsicentificLaLaLaLa/tiny-dap repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.4 × 10.2 mm with 15 parts on 38 nets, routed with 126 tracks and 21 vias.
Its parts include 4 resistors, 2 capacitors, 2 ICs, 2 diodes and 2 connectors.
[TOC]
基于 TinyUSB 和 CMSIS-5 实现的 CMSIS-DAP,支持 SWD 调试接口和串口通信。
选择 TinyUSB 作为协议栈的原因是 TinyUSB 开源免费,且适配多家 MCU,具有良好的通用性。
基于 CMSIS-5 实现 CMSIS-DAP 可以降低移植 DapLink 的难度,降低实现门槛。
hardware
v1.x
tiny-dap 的硬件实现,使用 KiCad 7.0 设计,已生成生产文件和原理图。
production
使用 KiCad 嘉立创提供的插件生成的生产文件。
software
tiny-dap 的软件实现,基于 MM32F0162D4Q。
目前计划采用 MM32F0162D4Q 作为 tiny-dap 的 MCU,后续也将计划在更多 QFN32 芯片上实现 tiny-dap,如果有精力的话。
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Horizonal_Edge | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | MCU | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U2 |

UnsicentificLaLaLaLa/tiny-dap
基于 TinyUSB 和 CMSIS-5 实现的 CMSIS-DAP,支持 SWD 调试接口和串口通信。

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk

It measures 25.4 × 10.2 mm and has 2 copper layers, 1.6 mm thick.
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UnsicentificLaLaLaLa/tiny-dap repository on GitHub, at the commit this page was made from: the board is hardware/v1.1/tiny-dap.kicad_pcb and its schematic hardware/v1.0/tiny-dap.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).