2 layers50 × 65.3 mm
BatteryBoardV1
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
26 parts
2 layers57 × 86 mm
Sensor
UND-ARC/Lander-ChallengeCode repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
- Size
- 57 × 86 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 48
- Pads
- 105
- Tracks, vias
- 121, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Nov 2024
- Updated
- 22 Jun 2026
Overview
Sensor is an open-source printed circuit board by UND-ARC, from the UND-ARC/Lander-Challenge repository on GitHub. It is a 2-layer board of 57 × 86 mm with 16 parts on 48 nets, routed with 121 tracks and 11 vias.
It is built around the MC7805BDTRKG. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C2 | Capacitor_SMD:C_0805_2012Metric | 0.33uF, 10uF |
| 2 | R_0805_2012Metric | Resistor_SMD:R_0805_2012Metric | 1k Ohm, 2k Ohm |
| 2 | ~ | Connector_JST:JST_PH_S9B-PH-K_1x09_P2.00mm_Horizontal | Terraranger_Evo_LIDAR1, Terraranger_Evo_LIDAR2 |
| 2 | ~ | Library:BNO055 | BNO55, BNO0551 |
| 1 | LOGO | LOGO | G*** |
| 1 | MC7805BDTRKG | Library:DPAK229P990X238-4N | U1 |
| 1 | RASPBERRY_PI_4B_4GB | RaspberryPiLF:MODULE_RASPBERRY_PI_4B_4GB | U2 |
| 1 | ~ | Library:MPL3115A2 | MPL3115A2Barometer1 |
| 1 | ~ | Library:PA1616S | PA1616SGPS1 |
| 1 | ~ | Library:RFM69 | RFM95WLoRaRadio1 |
The 14 most common of 16 parts.
Questions
How big is the Sensor PCB?
It measures 57 × 86 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor use?
16 parts, built around the MC7805BDTRKG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor KiCad files?
From the UND-ARC/Lander-Challenge repository on GitHub, at the commit this page was made from: the board is Lander Controls/Sub-Scale PCB/Lander V1/SensorBoardV1/sensor.kicad_pcb and its schematic Electronics and Design/Circuit Schematic and PCB Design/KiCAD Files/Initial Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask UND-ARC before reusing the design.
More from UND-ARC/Lander-Challenge
3- 2 layers56 × 85 mm
RaspberyBoardV1
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
23 parts - 2 layers168 × 56 mm
Initial Schematic
UND-ARC/Lander-Challenge
Code repository for TVC and controls system for the UND Advanced Rocketry Club Liquid Lander
20 parts
Similar boards
- 2 layers54.9 × 54.5 mm
- 4 layers192 × 137.2 mm
- 2 layers50 × 60 mm
- 2 layers19 × 212.7 mm
- 2 layers92 × 117 mm
- 4 layers78.5 × 55.7 mm
- 2 layers70 × 96 mm
Antenna switch comms
sq9nje/matrix_antenna_switch
A 2x6 matrix antenna switch for HF HAM radio
44 parts15Unlicense - 2 layers69.9 × 47.8 mm
