
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

PCB Design for the Fuel Pump Motor Controller
Fuel Pump Controller is an open-source printed circuit board by UMD-FSAE-Combustion, from the UMD-FSAE-Combustion/Fuel-Pump-Controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.8 × 19.3 mm with 11 parts on 6 nets, routed with 20 tracks and 0 vias.
Its parts include 5 connectors, 2 resistors, 2 diodes and 1 transistor. It belongs with the robots and motor control boards of this library.
PCB Design for the Fuel Pump Motor Controller
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | BAT+ | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | J2 |
| 1 | BAT- | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J5 |
| 1 | CTRL | Connector_Pin:Pin_D1.0mm_L10.0mm | J1 |
| 1 | IRFZ744N | Package_TO_SOT_THT:TO-220-3_JB | Q1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | MNT | MountingHole:MountingHole_2.1mm | H1 |
| 1 | M_IN | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J3 |
| 1 | M_OUT | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J4 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 19.8 × 19.3 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UMD-FSAE-Combustion/Fuel-Pump-Controller repository on GitHub, at the commit this page was made from: the board is fuel_pump_controller.kicad_pcb and its schematic fuel_pump_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).