
Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

auto dispenser
Cvbs mipi bridge is an open-source printed circuit board by ultrasonic59, from the ultrasonic59/snail_w repository on GitHub. It is a 4-layer board of 55 × 70 mm with 116 parts on 99 nets, routed with 571 tracks and 295 vias.
It is built around the SN74AUP1G17DCKR-TP, ADV7282WBCPZ-M and ERJ2GE0R00X, with the CR0402-FX-1003GLF, BSS138PW and KP-1608ZGC among its other parts. Its parts include 33 resistors, 32 capacitors, 8 diodes, 7 connectors and 4 ICs. It belongs with the interfaces and adapters boards of this library.
Copyright (c) 2022 Antmicro

This repository contains open hardware design files for a video bridge converting the analog composite video (CBVS) standard into MIPI CSI-2. The video conversion is handled with Analog Devices ADV7828-M 10-bit 4x Oversampled SDTV Video Decoder. The design files were prepared in KiCad.
The main repository directory contains KiCad PCB project files, a LICENSE and README. The remaining files are stored in the following directories:
lib - contains the component librariesimg - contains graphics for this READMEPlease note that according to the datasheet the ADV7282-M includes an embedded analog multiplexer and processes only one analog input channel at a time.
This video accessory is electrically compatible with several video processing platforms created by Antmicro, such as:
It can also be used with NVIDIA AGX Xavier and NVIDIA AGX Orin with a dedicated adapter.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | C_100n_0402 | cvbs-mipi-bridge-footprints:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C10, C13, C14, C16, C17, C20, C21, C24, C26, C29 +1 |
| 16 | TP_1.5mm_SMD | cvbs-mipi-bridge-footprints:TP_SMD_1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16 |
| 8 | R_0R_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R20, R21, R22, R23, R24, R25, R32, R33 |
| 7 | R_100k_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R17, R18, R19, R27, R28, R29, R31 |
| 5 | C_1u_0402 | cvbs-mipi-bridge-footprints:C_0402_1005Metric | C8, C9, C25, C27, C28 |
| 4 | BSS138PW | cvbs-mipi-bridge-footprints:SC70-3 | Q1, Q2, Q3, Q4 |
| 4 | C_10n_0402 | cvbs-mipi-bridge-footprints:C_0402_1005Metric | C11, C15, C18, C19 |
| 4 | FB_220Z_1.5A_0805 | cvbs-mipi-bridge-footprints:FB_0805_2012Metric | FB1, FB3, FB4, FB5 |
| 4 | LED_G_0603_KP-1608ZGC | cvbs-mipi-bridge-footprints:LED_0603_1608Metric_G | D5, D6, D7, D8 |
| 4 | RCA_PHONO_JACK_KLPX-0848A-2-Y | cvbs-mipi-bridge-footprints:RCA_PHONO_JACK_KLPX-0848A-2-Y | J3, J4, J5, J6 |
| 4 | R_24R_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R1, R4, R8, R10 |
| 4 | R_470R_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R12, R13, R14, R26 |
| 4 | R_51R_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R3, R5, R9, R11 |
| 4 | Spacer_H3mm_9774030243R | cvbs-mipi-bridge-footprints:Spacer_SMD_M2_H3mm_Wurth_9774030243R | MP1, MP2, MP3, MP4 |
| 4 | UCLAMP2501T.TCT | cvbs-mipi-bridge-footprints:SLP1006P2T | D1, D2, D3, D4 |
| 3 | C_10u_0603 | cvbs-mipi-bridge-footprints:C_0603_1608Metric | C30, C31, C32 |
| 2 | C_10p_0402 | cvbs-mipi-bridge-footprints:C_0402_1005Metric | C22, C23 |
| 2 | R_4k7_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R6, R7 |
| 2 | SN74AUP1G17_SC70 | cvbs-mipi-bridge-footprints:SC-70-5 | IC4, IC5 |
| 1 | ADV7282-M | cvbs-mipi-bridge-footprints:LFCSP-32-1EP-5x5mm | IC1 |
| 1 | C_1u_0603 | cvbs-mipi-bridge-footprints:C_0603_1608Metric | C12 |
| 1 | Conn_FFC_68715014522 | cvbs-mipi-bridge-footprints:WE_68715014522 | J1 |
| 1 | Oscillator_SMD_28.63636MHz_KX-7 | cvbs-mipi-bridge-footprints:Oscillator_SMD_Geyer_KX-7-4Pin_3.2x2.5mm | Y1 |
| 1 | PinHeader_1x2_P2.54mm_Drill1.1mm | cvbs-mipi-bridge-footprints:PinHeader_1x2_P2.54_Drill0.9mm | J7 |
| 1 | PinHeader_1x2_P2.5mm_Drill1.1mm_Shrouded_Latch | cvbs-mipi-bridge-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm_Shrouded_Latch | J2 |
| 1 | R_0R_0805 | cvbs-mipi-bridge-footprints:R_0805_2012Metric | R30 |
| 1 | R_1M_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R16 |
| 1 | R_1k_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R2 |
| 1 | R_22k_0402 | cvbs-mipi-bridge-footprints:R_0402_1005Metric | R15 |
| 1 | SW_SPST_KMR211NGLFS | cvbs-mipi-bridge-footprints:SW_SPST_4.2x2.8 | S1 |
| 1 | TLV70018_SC70 | cvbs-mipi-bridge-footprints:SC-70-5 | IC2 |
The 114 most common of 116 parts.

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.

tscircuit/dataset-srj24
Ten production-oriented KiCad boards converted to Simple Route JSON

antmicro/cm4-baseboard-lvds-adapter
Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays

antmicro/environment-sensor-myra-baseboard
This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.

antmicro/lpddr4-test-board
Experimental development board interfacing Xilinx Kintex-7 FPGA with LPDDR4 SDRAM


antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
It measures 55 × 70 mm and has 4 copper layers, 1.59 mm thick.
116 parts, built around the SN74AUP1G17DCKR-TP, ADV7282WBCPZ-M, ERJ2GE0R00X and CR0402-FX-1003GLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ultrasonic59/snail_w repository on GitHub, at the commit this page was made from: the board is doc/mipi/cvbs-mipi-bridge/cvbs-mipi-bridge.kicad_pcb and its schematic doc/mipi/cvbs-mipi-bridge/cvbs-mipi-bridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ultrasonic59 before reusing the design.