2 layers193.5 × 141 mm
PIC
hassan-ibn-mustafa/EduBoard_PIC16
An educational, single-layer development board designed to simplify learning and prototyping with the Microchip PIC16F877A microcontroller.
72 parts1
2 layers137.2 × 128.8 mm
3 mode bottle filling machine
Ukahelijah/PICproject-machine-this project is a embedded system hardware project it contain both the hardware design file an software
- Size
- 137.2 × 128.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 69
- Pads
- 177
- Tracks, vias
- 400, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Jul 2024
- Updated
- 31 Jul 2024
Overview
3 mode bottle filling machine is an open-source printed circuit board by Ukahelijah, from the Ukahelijah/PICproject-machine- repository on GitHub. It is a 2-layer board of 137.2 × 128.8 mm with 49 parts on 69 nets, routed with 400 tracks and 15 vias.
It is built around the PIC16F877A-I/PT and BC547. Its parts include 10 capacitors, 9 resistors, 7 diodes, 5 switches and 4 ICs. It belongs with the PIC boards of this library.
Main components
2README
README.mdthis project is a embedded system hardware project it contain both the hardware design file an software
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1k5 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R5, R6, R7, R8, R9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C8, C9, C10 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R10 |
| 3 | 1uf | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 3 | Blue | LED_THT:LED_D3.0mm | D2, D3, D4 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 1 | 10n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C7 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D7 |
| 1 | 47n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C6 |
| 1 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x03_Pin | Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm | J3 |
| 1 | Crystal | Crystal:Crystal_HC52-U_Vertical | Y1 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | Green | LED_THT:LED_D3.0mm | D6 |
| 1 | LCD-016N002L | Display:LCD-016N002L | U4 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | Mode_Button | Button_Switch_THT:SW_PUSH-12mm | SW4 |
| 1 | PIC16F877A-IP | Package_DIP:DIP-40_W15.24mm_LongPads | U2 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |
| 1 | Red | LED_THT:LED_D3.0mm | D1 |
| 1 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Start_Button | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | Yellow | LED_THT:LED_D3.0mm | D5 |
The 48 most common of 49 parts.
Questions
How big is the 3 mode bottle filling machine PCB?
It measures 137.2 × 128.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 3 mode bottle filling machine use?
49 parts, built around the PIC16F877A-I/PT and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 3 mode bottle filling machine KiCad files?
From the Ukahelijah/PICproject-machine- repository on GitHub, at the commit this page was made from: the board is 3 mode bottle filling machine/3 mode bottle filling machine.kicad_pcb and its schematic 3 mode bottle filling machine/3 mode bottle filling machine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 3 mode bottle filling machine design in my own project?
Its repository states no licence, so its author keeps all rights: ask Ukahelijah before reusing the design.
Similar boards
- 2 layers880.8 × 192.5 mm
- 2 layers71.5 × 67.5 mm
1st
AbeetPaul/Smart-Load-Cell-Based-Food-Dispensing-Monitor-using-PIC16F877A-and-HX711-24-bit-ADC-
A custom PCB for precise food weight measurement, using a PIC16F877A and a 24-bit HX711 ADC to read load cell data.
9 parts - 2 layers94 × 106.7 mm
PicPongPCB
jaz-villanueva/pic-8x8-led-matrix-controller
Firmware and hardware implementation of an 8x8 LED matrix display using PIC microcontroller, featuring multiplexing control and custom display patterns.
21 partsApache-2.0 - 2 layers90 × 70 mm
- 2 layers83.3 × 65.3 mm
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
46 parts14kMIT - 2 layers56 × 65 mm
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342