Skip to the content
2 layers55 × 53 mmPanel, the printed circuit board in 3D

IR Illuminator and Camera Mount for Valve Index DIY Eye Tracker

Size
55 × 53 mm
Copper layers
2
Thickness
0.8 mm
Parts
753
Nets
72
Pads
824
Tracks, vias
96, 48
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 Mar 2024
Updated
5 May 2025

Overview

Panel is an open-source printed circuit board by ugokutennp, from the ugokutennp/flow-eye repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 53 mm with 753 parts on 72 nets, routed with 96 tracks and 48 vias.

Its parts include 48 resistors and 24 diodes.

README

README.md

flow-eye

IR Illuminator and Camera Mount for Valve Index DIY Eye Tracker

Prototype

Render Electrical Index

Note

  • Designed for OV2640-160°.
  • A rubber ring is used to mount the camera.
  • The part in front of the LED is a visible light filter (acrylic that passes only infrared light). It is attached for appearance.

Rev1.1

Render Electrical Index

Note

Frunk

3D data for the integration of a USB 3.0 2-port hub. It was created based on the following data
Index Hardware

Parts

753
QtyValueFootprintReferences
24LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +8
24RResistor_SMD:R_0603_1608MetricR1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +8
24RResistor_SMD:R_2816_7142MetricR2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +8
1LOGOpanel:flow_lab_logoG***

The 73 most common of 753 parts.

More from ugokutennp/flow-eye

2
  • 2 layers53.4 × 41.5 mmFlowEye Rev1.1, the printed circuit board in 3D

    FlowEye Rev1.1

    ugokutennp/flow-eye

    IR Illuminator and Camera Mount for Valve Index DIY Eye Tracker

    17 parts35MIT
  • 2 layers8 × 4 mmFlowLight, the printed circuit board in 3D

    FlowLight

    ugokutennp/flow-eye

    IR Illuminator and Camera Mount for Valve Index DIY Eye Tracker

    3 parts35MIT

Similar boards

  • 2 layers305.7 × 108.4 mmFullKeyboardV1, the printed circuit board in 3D

    FullKeyboardV1

    alxhoff/RGB-Mechanical-Keyboard

    Mechanical keyboard with various configurations and "in-PCB" WS2812 RGB LEDs

    751 parts2GPL-3.0
  • 2 layers90.3 × 90.7 mmPanel, the printed circuit board in 3D

    Panel

    comradef191/adc2therm

    Simple and compact PCB with the supporting circuitry for connector a Thermistor to an ADC pin

    755 partsCERN-OHL-S-2.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 2 layers423.5 × 392.5 mmMtt final, the printed circuit board in 3D

    Mtt final

    itsmevjnk/MelbourneTrainTracker

    Melbourne Train Tracker project repository (SIT210, T1/2025)

    758 parts40
  • 2 layers414 × 248 mm00-origin calculator, the printed circuit board in 3D

    00-origin calculator

    nikolafilip/nibble

    A 4-bit computer built from individual transistors, in public. No integrated circuits. AI-designed, hand-soldered.

    747 parts1CERN-OHL-P-2.0
  • 2 layers72 × 100 mmTeebeutel Expansion, the printed circuit board in 3D

    Teebeutel Expansion

    entropia/Teebeutel-Expansion

    Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.

    759 parts1
  • 2 layers176.1 × 174.9 mmUSBC FEMALE, the printed circuit board in 3D

    USBC FEMALE

    vikki-rai-k/Kicad

    All the Kicad designs will be available here

    746 parts
  • 2 layersDigital Board, the printed circuit board in 3D

    Digital Board

    mfkiwl/CGMPCX1006-cyusb3014

    Amplifier Board PCB Project

    761 parts

Questions

How big is the Panel PCB?

It measures 55 × 53 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Panel use?

753 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panel KiCad files?

From the ugokutennp/flow-eye repository on GitHub, at the commit this page was made from: the board is Prototype/PCB/panel/panel.kicad_pcb and its schematic Prototype/PCB/FlowLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panel design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).