
Power distribution
menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

electrical and electronics designs for BearCart
Bearcar thalamus is an open-source printed circuit board by UCA-RBEG, from the UCA-RBEG/bearcar_ee repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 85 × 56 mm with 25 parts on 72 nets, routed with 97 tracks and 1 via.
Its parts include 8 connectors, 4 resistors, 2 ICs, 2 switches and 1 capacitor. It belongs with the RP2040 boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH3, MH3, MH4 |
| 3 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 3V3_OUT | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J7 |
| 1 | 5VIN_RPi | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | ADC | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | ESC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | GY-521 | GY-521:HiLetGo-GY-521 | U2 |
| 1 | LED_RKGB | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | LOGO | logo_lib:bear_logo | G*** |
| 1 | PWM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Pico | RaspberryPi_Pico_THT:RaspberryPi_Pico_THT | U1 |
| 1 | SPARE_GPIO | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J5 |
| 1 | SRV | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | VBUS_OUT | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J6 |

menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot

opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.



kounocom/Mumo
A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.


It measures 85 × 56 mm and has 4 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the UCA-RBEG/bearcar_ee repository on GitHub, at the commit this page was made from: the board is bearcar_thalamus/bearcar_thalamus.kicad_pcb and its schematic bearcar_thalamus/bearcar_thalamus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).