2 layers192.2 × 150.5 mm
2 layers190.9 × 152.8 mm
Djinn
tzarc/keyboards993@tzarc's custom keyboard designs.
- Size
- 190.9 × 152.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 283
- Nets
- 168
- Pads
- 3,677
- Tracks, vias
- 2,956, 630
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Oct 2020
- Updated
- 16 Apr 2025
Overview
Djinn is an open-source printed circuit board by tzarc, from the tzarc/keyboards repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 190.9 × 152.8 mm with 283 parts on 168 nets, routed with 2,956 tracks and 630 vias.
It is built around the USBLC6-4SC6, MB85RS64A and MT9700, with the SK6812MINI-E, AO3401A and MMUN2233LT1G among its other parts. Its parts include 84 diodes, 60 capacitors, 34 switches, 22 resistors and 8 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
8
USBLC6-4SC6
SOT-23-6-55℃~+125℃ 0.3pF 15V 300W@8/20us 4.7A@8/20us 5V 6V 80nA ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
MB85RS64A
SO8-150milSO8-150mil New Arrivals ROHSFUJITSUUncategorised
MT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution Switches
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMMUN2233LT1G
SOT-231 NPN (Pre-Biased) 1.3V@5mA,0.3V 100mA 12 200mW 250MHz 300mV@5mA,0.25mA 500mV@100uA,5V 50V 6.11kΩ 80 NPN SOT-23 Digital Transistors ROHSTECH PUBLICDigital Transistors
SMF5.0CA
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiacheng
KLJ-1625
SMD,16x16mm-35℃~+80℃ 16mm 16mm 2.8mm 2mA 4.1kHz 5V 75dB Passive (Externally Driven) Piezoelectric SMD SMD,16x16mm Buzzers ROHSKELIKINGBuzzers
README
README.md@tzarc's Keyboards.
Here you'll find the design files for @tzarc's custom keyboard designs.
Since February 2024, licenses have changed from GPL3 to CERN-OHL-S.
Djinn
The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster. It also has a 5-way tactile switch under the thumb.
Ghoul
The Ghoul is a Planck-like development board for QMK, using SparkFun MicroMod for hot-swap MCU capability in a 2x4x5=40 layout with encoder and RGB OLED, per-key RGB.
Kobold
The Kobold is an ortho 4x4 macropad, as a replacement for a bm16s with modern hardware.
Parts
283| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | reversible-kicad-footprints:MX-1U-SK6812Mini-E | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +16 | |
| 32 | 100n | reversible-kicad-footprints:MX-1U-Cap0805 | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +16 |
| 32 | 1N4148 | reversible-kicad-footprints:MX-1U-D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 32 | SW_Push | reversible-kicad-footprints:MX-1U-Hotswap | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +16 |
| 23 | 100n | reversible-kicad-footprints:C-0805_2012Metric | C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C44, C45, C47, C51, C52, C53 +7 |
| 10 | SK6812Mini-E | reversible-kicad-footprints:SK6812Mini-E | LED33, LED34, LED35, LED36, LED37, LED38, LED39, LED40, LED41, LED42 |
| 8 | 1N4148 | reversible-kicad-footprints:D_SOD-123 | D33, D34, D35, D36, D37, D39, D42, D43 |
| 8 | 9.1k | reversible-kicad-footprints:R-0805_2012Metric | R7, R9, R13, R16, R17, R18, R20, R21 |
| 4 | 10u | reversible-kicad-footprints:CP_3216 | C43, C48, C49, C50 |
| 4 | 5.1k | reversible-kicad-footprints:R-0805_2012Metric | R2, R10, R11, R12 |
| 3 | AO3401A | reversible-kicad-footprints:SOT-23-3 | Q2, Q3, Q6 |
| 3 | MMUN2233LT1G | reversible-kicad-footprints:SOT-23-3 | Q4, Q5, Q7 |
| 2 | 120 | reversible-kicad-footprints:R-0805_2012Metric | R1, R6 |
| 2 | 1M | reversible-kicad-footprints:R-0805_2012Metric | R3, R8 |
| 2 | 9.1k | DjinnFootprints:R-0805_2012Metric | R19, R22 |
| 2 | Djinn Logo | DjinnFootprints:DjinnLogo | LOGO3, LOGO4 |
| 2 | Djinn Name+Ver | DjinnFootprints:DjinnNameVer | LOGO5, LOGO6 |
| 2 | QMK Logo | DjinnFootprints:QMK_PoweredBy | LOGO1, LOGO2 |
| 2 | QMK QRCode | DjinnFootprints:QMK_QRCode | LOGO7, LOGO8 |
| 2 | SMF5.0CA | reversible-kicad-footprints:D_SOD-123 | D40, D41 |
| 2 | STM32G474RETx | DjinnFootprints:STM32G474RETx | U1, U2 |
| 2 | USBLC6-4SC6 | reversible-kicad-footprints:SOT-23-6 | U3, U4 |
| 1 | 1.5A 1206 Polyfuse | reversible-kicad-footprints:Fuse_1206_3216Metric | F2 |
| 1 | 1.5k | reversible-kicad-footprints:R-0805_2012Metric | R5 |
| 1 | 100k | reversible-kicad-footprints:R-0805_2012Metric | R4 |
| 1 | 13.7k | reversible-kicad-footprints:R-0805_2012Metric | R15 |
| 1 | 3.0A 1206 Polyfuse | reversible-kicad-footprints:Fuse_1206_3216Metric | F1 |
| 1 | 3.3V | reversible-kicad-footprints:TestPoint | TP7 |
| 1 | 4.5V | reversible-kicad-footprints:TestPoint | TP5 |
| 1 | 4.7n | reversible-kicad-footprints:C-0805_2012Metric | C46 |
| 1 | 5.1k | reversible-kicad-footprints:SolderJumper-1.0x1.5mm_x2 | SB1 |
| 1 | 52.3k | reversible-kicad-footprints:R-0805_2012Metric | R14 |
| 1 | 5Way-Tactile_K1-1506DN-01 | reversible-kicad-footprints:5Way-K1-1506DN-01 | SW33 |
| 1 | AP2127K-3.3 | reversible-kicad-footprints:SOT-23-5 | U5 |
| 1 | AudioJack3 | reversible-kicad-footprints:PJ-3136-B | J1 |
| 1 | BOOT0 | reversible-kicad-footprints:TestPoint | TP10 |
| 1 | BOOT0_CHRG | reversible-kicad-footprints:TestPoint | TP12 |
| 1 | CC1 | reversible-kicad-footprints:TestPoint | TP39 |
| 1 | CC2 | reversible-kicad-footprints:TestPoint | TP41 |
| 1 | COL1 | reversible-kicad-footprints:TestPoint | TP9 |
| 1 | COL2 | reversible-kicad-footprints:TestPoint | TP11 |
| 1 | COL3 | reversible-kicad-footprints:TestPoint | TP13 |
| 1 | COL4 | reversible-kicad-footprints:TestPoint | TP15 |
| 1 | COL5 | reversible-kicad-footprints:TestPoint | TP16 |
| 1 | COL6 | reversible-kicad-footprints:TestPoint | TP18 |
| 1 | COL7 | reversible-kicad-footprints:TestPoint | TP20 |
| 1 | COMMS | reversible-kicad-footprints:TestPoint | TP14 |
| 1 | DFU | reversible-kicad-footprints:PushButton_4.5mm | SW34 |
| 1 | EEP_CS | reversible-kicad-footprints:TestPoint | TP40 |
| 1 | ENC_A | reversible-kicad-footprints:TestPoint | TP44 |
| 1 | ENC_B | reversible-kicad-footprints:TestPoint | TP45 |
| 1 | GND | reversible-kicad-footprints:TestPoint | TP1 |
| 1 | HAND | reversible-kicad-footprints:TestPoint | TP42 |
| 1 | KLJ-1625 | reversible-kicad-footprints:Piezo-KLJ-1625 | BZ1 |
| 1 | LCD-ILI9341-2.2in | DjinnFootprints:LCD-ILI9341-2.2in | U8 |
| 1 | LCD_BL | reversible-kicad-footprints:TestPoint | TP38 |
| 1 | LCD_CS | reversible-kicad-footprints:TestPoint | TP33 |
| 1 | LCD_DC | reversible-kicad-footprints:TestPoint | TP34 |
| 1 | LCD_EN | reversible-kicad-footprints:TestPoint | TP31 |
| 1 | LCD_Left | DjinnFootprints:SolderJumper-1.0x1.5mm_x9 | J4 |
| 1 | LCD_PW | reversible-kicad-footprints:TestPoint | TP29 |
| 1 | LCD_RST | reversible-kicad-footprints:TestPoint | TP36 |
| 1 | LCD_Right | DjinnFootprints:SolderJumper-1.0x1.5mm_x9 | J5 |
| 1 | MB85RS64 | reversible-kicad-footprints:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | MISO | reversible-kicad-footprints:TestPoint | TP4 |
| 1 | MMUN2133LT1G | reversible-kicad-footprints:SOT-23-3 | Q1 |
| 1 | MOSI | reversible-kicad-footprints:TestPoint | TP6 |
| 1 | MT9700 | reversible-kicad-footprints:SOT-23-5 | U6 |
| 1 | NRST | reversible-kicad-footprints:TestPoint | TP8 |
| 1 | Outline Footprint | DjinnFootprints:Djinn_MainPCB | OUTLINE1 |
| 1 | PLUG | reversible-kicad-footprints:TestPoint | TP43 |
| 1 | RGB_1.5 | reversible-kicad-footprints:TestPoint | TP22 |
| 1 | RGB_3.0 | reversible-kicad-footprints:TestPoint | TP24 |
| 1 | RGB_D | reversible-kicad-footprints:TestPoint | TP21 |
| 1 | RGB_EN | reversible-kicad-footprints:TestPoint | TP19 |
| 1 | RGB_LM | reversible-kicad-footprints:TestPoint | TP26 |
| 1 | RGB_PW | reversible-kicad-footprints:TestPoint | TP17 |
| 1 | ROW1 | reversible-kicad-footprints:TestPoint | TP23 |
| 1 | ROW2 | reversible-kicad-footprints:TestPoint | TP25 |
| 1 | ROW3 | reversible-kicad-footprints:TestPoint | TP27 |
The 269 most common of 283 parts.
More from tzarc/keyboards
2- 4 layers76 × 75.1 mm
Similar boards
- 2 layers193.5 × 133.9 mm
Keyboard left
jasonlaguidice/TKL-Split-Keyboard
Board edge fillet plugin used: https://github.com/tywtyw2002/FilletEdge
232 parts - 4 layers50.5 × 80 mm
- 2 layers457.4 × 132 mm
SP110Duo
printsmith/keyboards
Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.
309 parts - 2 layers183.9 × 155.8 mm
Hermod left
modern-hobbyist/aesir
Collection of KiCad PCB designs for custom keyboards, including full-sized and split ergonomic layouts with STM32F072CBT6 microcontrollers.
198 parts27 - 4 layers165 × 125 mm
- 4 layers28 × 28 mm
Lichtenprog
cr1tbit/lichtenprog
USB-to-UART / (esp8266 / esp32) programmer with 3.3v supply
76 parts2CERN-OHL-P-2.0 - 2 layers146.1 × 208.9 mm
Masterthesis hardware
Fescron/masterthesis
This repository is a collection of hardware, firmware and some documentation files for the project I created for my masterthesis.
247 parts - 2 layers77.1 × 79.6 mm
Questions
How big is the Djinn PCB?
It measures 190.9 × 152.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Djinn use?
283 parts, built around the USBLC6-4SC6, MB85RS64A, MT9700 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Djinn KiCad files?
From the tzarc/keyboards repository on GitHub, at the commit this page was made from: the board is Djinn/Rev1/Djinn.kicad_pcb and its schematic Ghoul/v1.0/ghoul.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Djinn design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).