Skip to the content
4 layers56.3 × 46.8 mmConditioner+adc, the printed circuit board in 3D
Size
56.3 × 46.8 mm
Copper layers
4
Thickness
1.54 mm
Parts
53
Nets
66
Pads
196
Tracks, vias
313, 49
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2025
Updated
16 Sep 2026

Overview

Conditioner+adc is an open-source printed circuit board by tylerpatterson776, from the tylerpatterson776/fatigue repository on GitHub. It is a 4-layer board of 56.3 × 46.8 mm with 53 parts on 66 nets, routed with 313 tracks and 49 vias.

It is built around the ADS1115. Its parts include 28 resistors, 10 capacitors, 6 connectors, 4 ICs and 2 diodes.

Main components

1

Parts

53
QtyValueFootprintReferences
1210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R5, R6, R7, R10, R16, R17, R18, R19, R23, R24
60.1 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C5, C6, C11, C12
4CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4, C9, C10
4RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR11, R12, R20, R21
3CONN_JST_1x2_1.25mmPitch1Personal:CONN_JST_1x2_1.25mmPitchJ1, J2, J3
3TestPointTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3
210.2kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R14
210kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR25, R26
212kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR8, R27
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13, R22
23160Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR9, R28
23400Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R15
2ADS1115Package_SO:TSSOP-10_3x3mm_P0.5mmU2, U4
2LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2
2~Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1, U3
1Conn_01x031Personal:CONN_JST_1x3_1.25mmPitchJ6
1Conn_01x061Personal:CONN_JST_1x6_1.25mmPitchJ5
1Conn_02x20_RaspberryPi_40Pin1Personal:CONN_RASPBERRYPI_40PIN_2x20J4

More from tylerpatterson776/fatigue

2
  • 2 layers26.7 × 22.3 mmConditioner, the printed circuit board in 3D

    Conditioner

    tylerpatterson776/fatigue

    19 parts
  • 2 layers65 × 56 mmFatigue, the printed circuit board in 3D

    Fatigue

    tylerpatterson776/fatigue

    7 parts

Similar boards

  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 2 layers94 × 79 mm5 - Lizard Car, the printed circuit board in 3D

    5 - Lizard Car

    TRD-B/Lizard

    3D printed RC race car with custom electronics

    54 parts129CC-BY-4.0
  • 2 layers54.6 × 33 mmJuntekOnSteroidsTTGO, the printed circuit board in 3D

    JuntekOnSteroidsTTGO

    rin67630/Drok-Juntek-on-steroids

    Extend the possibilities of cheap digital power supplies with a WiFi module

    35 parts62
  • 2 layers155 × 70 mmPayphone v1, the printed circuit board in 3D

    Payphone v1

    sdylewski/Analog-Redial

    A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…

    137 parts46
  • 2 layers32.4 × 33 mmOpenXsensor, the printed circuit board in 3D

    OpenXsensor

    Ingwie/OpenAVRc_Hw

    OpenAVRc Hardware and addons

    40 parts26
  • 2 layers33.9 × 90 mmBiasPro InputProtection v3, the printed circuit board in 3D

    BiasPro InputProtection v3

    ToneAlchemy/BiasPro

    A professional-grade, dual-probe Arduino Bias Meter for guitar tube amplifiers. Open source hardware & firmware

    18 parts16MIT
  • 4 layers52.5 × 59.7 mmESPHome Indoor Multi Sensor, the printed circuit board in 3D

    ESPHome Indoor Multi Sensor

    mikelawrence/esphome-indoor-multi-sensor-hardware

    ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

    113 parts14CERN-OHL-P-2.0
  • 4 layers260 × 113 mmCellKeeper, the printed circuit board in 3D

    CellKeeper

    cellkeeper-bms/cellkeeper-hardware

    PCB for the CellKeeper BMS

    480 parts11GPL-3.0

Questions

How big is the Conditioner+adc PCB?

It measures 56.3 × 46.8 mm and has 4 copper layers, 1.54 mm thick.

What parts does the Conditioner+adc use?

53 parts, built around the ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Conditioner+adc KiCad files?

From the tylerpatterson776/fatigue repository on GitHub, at the commit this page was made from: the board is Hardware/modules/conditioner+adc module/conditioner+adc.kicad_pcb and its schematic Hardware/main board/fatigue.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Conditioner+adc design in my own project?

Its repository states no licence, so its author keeps all rights: ask tylerpatterson776 before reusing the design.