2 layers133.4 × 102 mm
RefleXion Grid
TweetyDaBird/RefleXion-Grid
Minimal footprint Split Ortho Keyboard with RP2040 MCU and USB link
185 parts
2 layers133.4 × 117.1 mm
RefleXion X65
TweetyDaBird/RefleXion-65Ortho Split Keyboard
- Size
- 133.4 × 117.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 176
- Nets
- 152
- Pads
- 1,090
- Tracks, vias
- 2,284, 471
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Sep 2022
- Updated
- 20 Jul 2025
Overview
RefleXion X65 is an open-source printed circuit board by TweetyDaBird, from the TweetyDaBird/RefleXion-65 repository on GitHub. It is a 2-layer board of 133.4 × 117.1 mm with 176 parts on 152 nets, routed with 2,284 tracks and 471 vias.
It is built around the RP2040, SN74LV1T34DBV and W25Q32JVUUIQ, with the SRV05-4, SPX3819M5-L-3-3/TR and 1N4148W among its other parts. Its parts include 80 diodes, 36 switches, 16 capacitors, 12 resistors and 6 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
11
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
W25Q32JVUUIQ
USON-8(3x4)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI USON-8(3x4) NOR FLASH ROHSWinbond ElecNOR FLASH
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SPX3819M5-L-3-3/TR
SOT-23-5-40℃~+125℃ 1 16V 3.3V 340mV@(500mA) 40uVrms 500mA 70dB 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
YTS-A002-1
SMD,4.8x2mm1.6N 12V 2mm 3.5mm 30,000 Cycles 4.8mm 50mA Black Rectangular Button SMD(SMT) Tab SPST Surface Mount, Right Angle SMD,4.8x2mm Tactile Switches ROHSYIYUANTactile Switches
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
CF06V5TR50
0603-20℃~+105℃ 0.005 0.8mm 1.6mm 500mA 50A 50V Surface Mount Fuse 0603 Disposable fuses ROHSTA-I TechDisposable Fuses
TXM12M0004252LBCEO00T
SMD2520-4P-40℃~+85℃ 120Ω 12MHz 20pF Crystal Oscillator ±10ppm ±30ppm SMD2520-4P Crystals ROHSYajingxinCrystals
README
README.mdRefleXion
Ortho Split Keyboard
This is a joint project with concept by 'The Reflex' (Pedro Quaresma), and design by 'TweetyDaBird' (Markus Knutsson).
Parts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 36 | SW_Push | Keyboard Switches:SW_MX_HotSwap_Reversible | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +20 |
| 33 | SK6812MINI-E | Keyboard RGB:MX_SK6812MINI-E_REVERSIBLE | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +17 |
| 11 | SK6812MINI-E | Keyboard RGB:MX_SK6812MINI-E_REVERSIBLE_special | LED34, LED35, LED36, LED37, LED38, LED39, LED40, LED41, LED42, LED43, LED44 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C8, C9, C10, C11, C12, C14, C15, C18 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C7, C13, C16, C17 |
| 4 | Spacer_PCB | Keyboard Common:Spacer PCB hole | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0402_1005Metric | R12, R13, R18 |
| 3 | 68K | Resistor_SMD:R_0402_1005Metric | R9, R10, R11 |
| 3 | BLM18SG700TZ1D | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB3, FB4, FB5 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R16, R17 |
| 2 | 30pF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | CC-BY-SA-4.0 | Logotypes:CC_BY_SA_40 | Logo3, Logo6 |
| 2 | CE_Logo | Logotypes:CE | Logo1, Logo2 |
| 2 | QMK_Logo | Logotypes:Powered_by_QMK | Logo4, Logo4 |
| 2 | RoHS_Logo | Logotypes:RoHs | Logo7, Logo8 |
| 2 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2, U6 |
| 2 | USB_C_Receptacle_USB2.0 | Keyboard Common:Molex-216990_GCT-USB45xx_HRO-TYPE-C-31-M-13x-PiMicro | USB1, USB2 |
| 2 | YTS-A002 | Keyboard Common:YTS-A002 | BOOT1, RES1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323F | ZD1 |
| 1 | CF06V5TR50 | Resistor_SMD:R_0603_1608Metric | F1 |
| 1 | Jumper_3_Open | Keyboard Common:SolderJumper-3_open_mini | JP17 |
| 1 | OLED_4pin | Keyboard Common:SSD1306-0.91-OLED-4pin-128x32 doublesided | OLED1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias | U8 |
| 1 | Rotary_Encoder_Click | Keyboard Encoders:Encoder_Alps_EC11E_Small | ENC1 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SPX3819M5-L-3-3/TR | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | Stabilizer_2u_MX | Keyboard Stabilizer:Stabilizer_Cherry_MX_2.00u | ST1 |
| 1 | TXM12M0004252LBCEO00T | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | W25Q32JVUUIQ | Keyboard Common:USON-8_4x3mm_P0.8mm | U7 |
Questions
How big is the RefleXion X65 PCB?
It measures 133.4 × 117.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RefleXion X65 use?
176 parts, built around the RP2040, SN74LV1T34DBV, W25Q32JVUUIQ and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RefleXion X65 KiCad files?
From the TweetyDaBird/RefleXion-65 repository on GitHub, at the commit this page was made from: the board is RefleXion X65/PCB v1.20/RefleXion X65.kicad_pcb and its schematic RefleXion X65/Front Plate - Blank/X65 Front Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RefleXion X65 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TweetyDaBird before reusing the design.
Similar boards
- 2 layers226 × 92 mm
Chameleon v1 10
TweetyDaBird/Fat-Chameleon
A Grid Ortho keyboard for BM40, JJ40/JJ50 cases inspired by Planck and Preonic
205 parts14CC-BY-SA-4.0 - 2 layers225.5 × 93 mm
Skinny Chameleon
TweetyDaBird/Skinny-Chameleon
The Skinny Chameleon is a grid type orthogonal keyboard made to be a direct drop-in for the Preonic's and Planck's PCB's.
201 parts3 - 2 layers285 × 94.6 mm
- 2 layers17.8 × 33.9 mm
Frood
piit79/Frood
Microcontroller module based on a RP2040 compatible with Elite-C / nice!nano
44 parts78GPL-3.0 - 4 layers137 × 141 mm
- 4 layers227.5 × 75.2 mm
- 2 layers304.3 × 108.3 mm
