
Xaar128-Driver
tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

Inkjet printer for printing ceramic thin films: software, electronics and CAD designs
Pressure sensor is an open-source printed circuit board by tuwrraphael, from the tuwrraphael/inkjet-printer repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 2 parts on 13 nets, routed with 13 tracks and 0 vias.
Its parts include 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
This repository contains the code, PCB, and CAD of the custom-designed inkjet printer for printing ceramic thin films, which was created as part of the master thesis Development of an Inkjet Printer for Electrolyte Layers of Oxygen Ion Batteries.
See a preview of the control software: https://tuwrraphael.github.io/inkjet-printer/.
An overview image of the implemented inkjet printer.
Details about the printer, challenges and design decisions, its application and evaluation can be found in the thesis.
Repository structure:
The main purpose of publishing this repository is to provide insights into the development of a custom inkjet printer. If you got inspired or found parts of this project useful, please cite the thesis.
@mastersthesis{HaukRaphael2024DoaI,
title = {Development of an Inkjet Printer for Electrolyte Layers of Oxygen Ion Batteries},
author = {Hauk, Raphael},
year = 2024,
school = {TU Wien},
address = {Vienna, Austria},
type = {{Master's thesis}},
note = {Available at: \url{https://doi.org/10.34726/hss.2024.116604}}
}This research was funded in part by the Austrian Science Fund (FWF) 10.55776/COE5.
The firmware builds on Zephyr Project, which is licensed under the Apache License 2.0. Tools and libraries used in the control software are listed in the app here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | ~ | Honeywell_ABP:ABPDRRV015PDSA3 | U1 |

tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tuwrraphael/inkjet-printer repository on GitHub, at the commit this page was made from: the board is pcbs/pressure-sensor/pressure-sensor.kicad_pcb and its schematic pcbs/Heatbed/Heatbed.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).