

CLAW001-XX
A microcontroller-based testing project
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 16
- Pads
- 32
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Nov 2023
- Updated
- 13 Dec 2023
Overview
CLAW001-XX is an open-source printed circuit board by tswett, from the tswett/clawtoast repository on GitHub. It is a 2-layer board with 9 parts on 16 nets.
Its parts include 4 diodes, 4 switches and 1 connector.
README
README.mdThis is the repository for Clawtoast, a project to create a modular testing system for electronics.
By publishing a modified version of this repository, you automatically license your modified version according to the copyright information below. If you do not wish to license your modified version under those terms, you must modify this README file to remove all license statements that you disagree with. Note that publishing a modified version without releasing your modified version under the GNU GPL v3 may be a violation of copyright law.
Warnings and disclaimers
Warning: The software, instructions, and other contents of this repository are likely to contain serious errors. Following the instructions in this repository, or using the software or other contents of this repository, may damage or destroy any or all connected devices. Do so at your own risk!
This repository is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
The above warning and disclaimer of warranty apply to the entire contents of this repository, regardless of whether or not any additional warranty or disclaimer is present in any individual file.
Copyright information
This file (README.md) is copyright 2023 Tanner Swett.
This file is part of Clawtoast. Clawtoast is free software: you can redistribute it and/or modify it under the terms of version 3 of the GNU General Public License as published by the Free Software Foundation.
To the extent to which it is legally possible, all of the contributors to this repository release the entire contents of this repository, and every part of the contents of this repository, under the GNU GPL v3. Note that this repository may contain files that were authored by other people and copied into it automatically as part of a template, and such files may or may not be licensed under the GNU GPL v3. The lack of a license statement in a particular file may indicate that it is such a file.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | SW_Push | CLAW001:1528-4954-ND | SW1, SW2, SW3, SW4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers103 × 30.5 mm

- 2 layers31.8 × 47.6 mm

- 2 layers24 × 27.3 mm

Expansion Card Retrofit
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
9 parts1.1kCC-BY-4.0 - 2 layers15.6 × 17.3 mm

SKR Mini TFT Thermistor Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
9 parts1.1kGPL-3.0 - 2 layers39.1 × 49.5 mm

Learnoliver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
9 parts915 - 2 layers17.4 × 16.9 mm

- 2 layers9.8 × 108 mm

- 2 layers

Keyboard after
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
9 parts547GPL-3.0
Questions
What parts does the CLAW001-XX use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CLAW001-XX KiCad files?
From the tswett/clawtoast repository on GitHub, at the commit this page was made from: the board is parts/CLAW001-XX-keyboard-assy/CLAW001-XX.kicad_pcb and its schematic parts/CLAW001-XX-keyboard-assy/CLAW001-XX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CLAW001-XX design in my own project?
Its repository states no licence, so its author keeps all rights: ask tswett before reusing the design.