Skip to the content
2 layersCLAW001-XX, the printed circuit board in 3D

A microcontroller-based testing project

Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
16
Pads
32
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
17 Nov 2023
Updated
13 Dec 2023

Overview

CLAW001-XX is an open-source printed circuit board by tswett, from the tswett/clawtoast repository on GitHub. It is a 2-layer board with 9 parts on 16 nets.

Its parts include 4 diodes, 4 switches and 1 connector.

README

README.md

This is the repository for Clawtoast, a project to create a modular testing system for electronics.

By publishing a modified version of this repository, you automatically license your modified version according to the copyright information below. If you do not wish to license your modified version under those terms, you must modify this README file to remove all license statements that you disagree with. Note that publishing a modified version without releasing your modified version under the GNU GPL v3 may be a violation of copyright law.

Warnings and disclaimers

Warning: The software, instructions, and other contents of this repository are likely to contain serious errors. Following the instructions in this repository, or using the software or other contents of this repository, may damage or destroy any or all connected devices. Do so at your own risk!

This repository is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

The above warning and disclaimer of warranty apply to the entire contents of this repository, regardless of whether or not any additional warranty or disclaimer is present in any individual file.

Copyright information

This file (README.md) is copyright 2023 Tanner Swett.

This file is part of Clawtoast. Clawtoast is free software: you can redistribute it and/or modify it under the terms of version 3 of the GNU General Public License as published by the Free Software Foundation.

To the extent to which it is legally possible, all of the contributors to this repository release the entire contents of this repository, and every part of the contents of this repository, under the GNU GPL v3. Note that this repository may contain files that were authored by other people and copied into it automatically as part of a template, and such files may or may not be licensed under the GNU GPL v3. The lack of a license statement in a particular file may indicate that it is such a file.

Parts

9
QtyValueFootprintReferences
41N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3, D4
4SW_PushCLAW001:1528-4954-NDSW1, SW2, SW3, SW4
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ1

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

What parts does the CLAW001-XX use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CLAW001-XX KiCad files?

From the tswett/clawtoast repository on GitHub, at the commit this page was made from: the board is parts/CLAW001-XX-keyboard-assy/CLAW001-XX.kicad_pcb and its schematic parts/CLAW001-XX-keyboard-assy/CLAW001-XX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CLAW001-XX design in my own project?

Its repository states no licence, so its author keeps all rights: ask tswett before reusing the design.