Skip to the content
2 layers30 × 30 mm8x8, the printed circuit board in 3D

TTL logic analyzer built from 74xx logic and LED dot matrix display

Size
30 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
16
Pads
32
Tracks, vias
39, 4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Apr 2026
Updated
31 Jul 2026

Overview

8x8 is an open-source printed circuit board by TSJR, from the TSJR/logic-analyzer repository on GitHub. It is a 2-layer board of 30 × 30 mm with 3 parts on 16 nets, routed with 39 tracks and 4 vias.

It belongs with the sensors and measurement and lEDs and displays boards of this library.

README

README.md

TTL Logic Analyzer

Breadboard and PCB-based logic analyzer built from discrete 74xx TTL logic, SRAM, and multiplexed LED matrix displays.

Overview

This project aims to build a fully discrete logic analyzer without using a microcontroller. The analyzer captures digital bus states into SRAM and displays captured samples on multiplexed LED matrices.

Project is currently in a state of active prototyping.

*This repository also contains a closely related project using an MCU-based design with 24 channels.

Current prototype

Features

  • Fully TTL-based architecture
  • SRAM-based sample capture
  • Multiplexed LED matrix display
  • External/internal clock modes
  • Planned trigger and halt functionality
  • Modular PCB-based design

Current Status

Current prototype supports:

  • 64ish x 8 sample memory subsystem on a self-designed PCB
  • LED matrix display driver

Known issues:

  • Limited memory
  • Pull down resistor problems

Architecture

Main subsystems:

  • Capture memory subsystem
  • Address/control logic
  • Clock generation and edge conditioning
  • Display subsystem

Relevant Simulation Subcircuits

  • analyzer_7400.circ — 74xx IC Implementation
    • mem_64x8: Full memory subsystem test built from 74xx-style chips using four ram_unit subcircuits.
    • ram_unit: 16x8 RAM unit built from 74xx-style chips; used as the building block for mem_64x8.
    • disp_16x16: Limited-capacity display subsystem test; does not yet include the physical driver circuitry needed for hardware.
  • analyzer_ttl.circ — Abstract Logic Implementation
    • mem_64x8_async: Asynchronous version of the 64x8 memory subsystem; same capacity as the final intended design.
    • disp_16x32: Full-capacity display subsystem test.

More detailed documentation:

Repository Structure

text
docs/                   Docs and architecture notes
images/                 Build photos and diagrams
pcb/                    KiCad PCB projects
simulations/            Logisim simulations
attiny-logic-analyzer/   Related MCU-based project

Hardware

Main IC families/components:

  • 74xx logic family chips
  • ULN2803 and UDN2981

Future Plans

  • Expand memory depth
  • Modular memory pcb
  • Trigger logic
  • Improved clock conditioning
  • PCB-based final implementation

If the project expands beyond basic TTL hardware, plans may include

  • USB interface
  • OLED display
  • Many more channels
  • Higher sampling rate

License

MIT License

Parts

3
QtyValueFootprintReferences
2Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalCOLS1, ROWS1
11088AS8x8dotmat:LED_1088_Pin_HeaderU1

More from TSJR/logic-analyzer

3
  • 2 layers162.6 × 97.3 mmMemory subsystem, the printed circuit board in 3D

    Memory subsystem

    TSJR/logic-analyzer

    TTL logic analyzer built from 74xx logic and LED dot matrix display

    73 parts
  • 2 layers50.3 × 80.3 mmLogic Analyzer, the printed circuit board in 3D

    Logic Analyzer

    TSJR/logic-analyzer

    TTL logic analyzer built from 74xx logic and LED dot matrix display

    16 parts
  • 2 layersBackplane, the printed circuit board in 3D

    Backplane

    TSJR/logic-analyzer

    TTL logic analyzer built from 74xx logic and LED dot matrix display

    2 parts

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the 8x8 PCB?

It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 8x8 use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 8x8 KiCad files?

From the TSJR/logic-analyzer repository on GitHub, at the commit this page was made from: the board is pcb/8x8/8x8.kicad_pcb and its schematic attiny-logic-analyzer/pcb/.kicad_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 8x8 design in my own project?

Its repository states no licence, so its author keeps all rights: ask TSJR before reusing the design.