
Atari
Tschibo00/zmk
I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.

I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.
BrettLe is an open-source printed circuit board by Tschibo00, from the Tschibo00/zmk repository on GitHub, published under the MIT licence. It is a 2-layer board of 135.7 × 110.5 mm with 25 parts on 24 nets, routed with 276 tracks and 23 vias.
Its parts include 17 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This project is a personal project, i just built one prototype. It's not considered complete, nor tested or error-free.
I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.
It is NOT ready to take the files and produce a working keyboard!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_Push | Keyswitches by Daprice:Kailh_socket_MX_reversible_sameside | SW2, SW3, SW4, SW5, SW6, SW8, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW20, SW21 +1 |
| 2 | LOGO | logo:brettle_logo | G***, G*** |
| 2 | MountingHole_Pad | kbd:1pin_conn | Bat+r1, BatGND1 |
| 1 | ProMicro-kbd | Promicro-Jumpers:ProMicro_facedown | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | RST_B |
| 1 | SW_SPDT | Kailh:SPDT_C128955r | SW_POWERR_BK |
| 1 | SW_SPDT | Kailh:SPDT_C128955 | SW_POWERR1 |

Tschibo00/zmk
I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.

Tschibo00/zmk
I won't develop this much, just releasing it as-is for anybody knowledgable picking up and maybe building upon it.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 135.7 × 110.5 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tschibo00/zmk repository on GitHub, at the commit this page was made from: the board is hackerbrettle/pcb/brettLe.kicad_pcb and its schematic atari/pcb/v1/atari.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).