
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

antenova: M10478-A2 GPS module diodesinc: AP3429/A 1.0MHz, 2A step-down DC-DC buck converter generic: FPC-F10CBS00V0F 12PIN SPI STN 9664 LCD ST7585 Drive IC 3.3V from AliExpress Nokia5110LCD 84x48 SPI display from eBay…
FPC12ConnectorToDIP is an open-source printed circuit board by trougnouf, from the trougnouf/KiCad-Libraries repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 32 × 10.3 mm with 2 parts on 12 nets, routed with 51 tracks and 0 vias.
Component libraries:
antenova:
M10478-A2 GPS module
diodesinc:
AP3429/A 1.0MHz, 2A step-down DC-DC buck converter
generic:
FPC-F10CBS00V0F 12PIN SPI STN 9664 LCD ST7585 Drive IC 3.3V from AliExpress
Nokia5110LCD 84x48 SPI display from eBay
melexis:
MLX90393 Micropower Triaxis Magnetometer
Footprint libraries:
con-trougnouf:
USB A SMD male connector (eBay)
FPC/FFC 12-pin 0.5mm SMD socket (eBay)
PCB designs:
Connectors:
FPC/FFC 12-pin 0.5mm socket to DIP adapter| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CONN_01X12 | con-trougnouf:FPC0.5mmConnector | P1 |
| 1 | CONN_01X12 | Pin_Headers:Pin_Header_Straight_1x12 | P2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 32 × 10.3 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the trougnouf/KiCad-Libraries repository on GitHub, at the commit this page was made from: the board is pcb/Connectors/FPC12toDIP/FPC12ConnectorToDIP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).