
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

Xl330-m288-t is an open-source printed circuit board by trongkiet-2501, from the trongkiet-2501/PCB repository on GitHub. It is a 2-layer board of 43.5 × 31 mm with 9 parts on 19 nets, routed with 82 tracks and 2 vias.
It is built around the MAX485ED. Its parts include 3 resistors, 2 capacitors, 2 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 1 | C | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C1 |
| 1 | C_Small_US | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C2 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-C3_SUPERMINI_SMD | esp32:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino



GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.

StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer

ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.

flxkrmr/eec-iv-reader-arduino
Arduino based diagnostics-tool for Fords EEC IV ECUs
It measures 43.5 × 31 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the trongkiet-2501/PCB repository on GitHub, at the commit this page was made from: the board is xl330-m288-t/xl330-m288-t.kicad_pcb and its schematic xl330-m288-t/xl330-m288-t-backups/xl330-m288-t-2026-08-04_141834/xl330-m288-t.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask trongkiet-2501 before reusing the design.