2 layers108.3 × 96.3 mm
Keyboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
122 parts915
2 layers88.8 × 73.5 mm
LogicBlocks Panel
TRLarsen/LogicBlocks_PanelA PCB panelization of the open source (out of production) SparkFun LogicBlocks kit designed to be manufacturable.
- Size
- 88.8 × 73.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 122
- Nets
- 8
- Pads
- 308
- Tracks, vias
- 197, 30
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Jun 2026
- Updated
- 25 Jun 2026
Overview
LogicBlocks Panel is an open-source printed circuit board by TRLarsen, from the TRLarsen/LogicBlocks_Panel repository on GitHub. It is a 2-layer board of 88.8 × 73.5 mm with 122 parts on 8 nets, routed with 197 tracks and 30 vias.
Its parts include 12 resistors, 9 capacitors, 6 diodes, 3 ICs and 3 switches.
README
README.mdLogicBlocks Panel
This is a PCB panelization of the open source (out of production) SparkFun LogicBlocks kit. It was made as a proof-of-concept and is not as maximally space efficient as it could be. Additionally, many of the parts in the schematic may need to be replaced with newer ones matching the original part's footprint. The only modifications made are those necessary for panelization.
[!IMPORTANT]
I am very appreciative of SparkFun's open sourcing of their design files. Despite their use, this project in no way implies support or endorsement from SparkFun.
Repository Contents
KiCad files required to open/edit/reproduce the panelization.
License Information
The hardware is released under Creative Commons ShareAlike 4.0 International.
Distributed as-is; no warranty is given.
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | FIDUCIALUFIDUCIAL | MICRO-FIDUCIAL | JP1, JP2, JP3, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP21, JP23, JP25, JP34, JP37, JP39 +8 |
| 8 | LOGO-SFESK | SFE-LOGO-FLAME | JP7, JP20, JP22, JP24, JP31, JP33, JP38, JP47 |
| 7 | CREATIVE_COMMONS | CREATIVE_COMMONS | U$1, U$2, U$3, U$4, U$5, U$6, U$7 |
| 6 | 1uF | 0402-CAP | C1, C2, C4, C5, C7, C9 |
| 6 | 200 | 0402-RES | R3, R4, R5, R7, R8, R11 |
| 6 | 499k | 0402-RES | R1, R2, R6, R9, R10, R12 |
| 6 | INPUT | 1X03-SMD-FEMALE | JP26, JP30, JP40, JP41, JP42, JP43 |
| 5 | 1X03_SMD_RA_MALE_POST | JP18, JP19, JP27, JP28, JP36 | |
| 4 | FIDUCIAL1X2 | FIDUCIAL-1X2 | FID1, FID2, FID3, FID4 |
| 3 | AYZ0202 | S1, S2, S3 | |
| 3 | 0.1uF | 0402-CAP | C3, C6, C8 |
| 3 | GREEN | LED-1206 | LED1, LED2, LED5 |
| 2 | OUTPUT | 1X03_SMD_RA_MALE_POST | JP29, JP35 |
| 1 | BATTCON_20MM_4LEGS | GND1 | |
| 1 | 1X03-SMD-FEMALE | JP32 | |
| 1 | 7408SE | SOT353 | U3 |
| 1 | 7432SE | SOT353 | U2 |
| 1 | BLUE | LED-1206 | LED6 |
| 1 | INVERTER"" | SC70 | U1 |
| 1 | LOGO-SFENW2 | SFE-NEW-WEB | JP17 |
| 1 | RED | LED-1206 | LED3 |
| 1 | YELLOW | LED-1206 | LED4 |
The 92 most common of 122 parts.
Similar boards
- 2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers139.1 × 107.7 mm
Lotus58 Glow 111
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
122 parts390 - 2 layers80 × 50 mm
- 2 layers100 × 100 mm
BulkyMIDI-32 Channel
tebl/BulkyMIDI-32
A HW build of the MT32-PI project, allowing you to emulate a Roland MT-32 using a Raspberry Pi. Includes enough additional modules to build a MIDI-mountain as well as adapters for connecting to most things retro.
122 parts80CC-BY-SA-4.0 - 2 layers89.5 × 62.2 mm
Module di
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
122 parts69GPL-3.0 - 2 layers49.9 × 49.9 mm
Frontend
softerhardware/Hermes-Lite
Deprecated project!!! See Hermes-Lite2 at main web site
122 parts65 - 2 layers98.5 × 95.5 mm
Main logic
tmarhguy/alu
8-bit combinational ALU built from scratch with 3,488 CMOS transistors (KiCad + SPICE + Logisim + 1.24M tests
122 parts48MIT
Questions
How big is the LogicBlocks Panel PCB?
It measures 88.8 × 73.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LogicBlocks Panel use?
122 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LogicBlocks Panel KiCad files?
From the TRLarsen/LogicBlocks_Panel repository on GitHub, at the commit this page was made from: the board is LogicBlocks_Panel.kicad_pcb and its schematic LogicBlocks_Panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LogicBlocks Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask TRLarsen before reusing the design.