2 layers50 × 35 mm
2 layers54.6 × 50.8 mm
Rfduino lure
tripzero/max-luresLure designs for the Minnowboard Max
- Size
- 54.6 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 15
- Pads
- 71
- Tracks, vias
- 101, 23
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 27 Mar 2015
- Updated
- 6 Apr 2015
Overview
Rfduino lure is an open-source printed circuit board by tripzero, from the tripzero/max-lures repository on GitHub. It is a 2-layer board of 54.6 × 50.8 mm with 17 parts on 15 nets, routed with 101 tracks and 23 vias.
Its parts include 3 ICs, 1 capacitor and 1 resistor.
README
rfduino-lure/README.mdRFDuino Minnowboard Max Lure
This lure adds Bluetooth Low Energy capabilities to the Minnowboard Max. Communication with the rfduino happens through the UART2 on the Max and GPIO_0 and GPIO_1 on the RFDuino. Protocol is TBD. This lure allows for the following features:
- Bluetooth Low Energy Support
- 5 GPIO with SPI and I2C
- Programmable with Arduino IDE 1.6+
- Should be compatible with some RFDuino shields
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | VAL** | RFDUINO_SHEILD | RFDUINO_SHEILD, RFDUINO_SHEILD, RFDUINO_SHEILD, RFDUINO_SHEILD, RFDUINO_SHEILD, RFDUINO_SHEILD, RFDUINO_SHEILD |
| 2 | LED | LED-0603 | LB1, LB2 |
| 1 | 100nf | SM1206 | C1 |
| 1 | 100ohm | SM1206 | R1 |
| 1 | EXT_ANT | SM1206 | U3 |
| 1 | MAX_LSE | pin_array_13x2 | U2 |
| 1 | R | SM1206 | 100ohm1 |
| 1 | RFDUINO | RFD22301 | BLE1 |
| 1 | RFDUINO_IO | SIL-8 | U1 |
| 1 | USB-PROGRAMMER | SIL-6 | USB1 |
Questions
How big is the Rfduino lure PCB?
It measures 54.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rfduino lure use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rfduino lure KiCad files?
From the tripzero/max-lures repository on GitHub, at the commit this page was made from: the board is rfduino-lure/rfduino-lure.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rfduino lure design in my own project?
Its repository states no licence, so its author keeps all rights: ask tripzero before reusing the design.
Similar boards
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
