2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282
2 layers26.4 × 27 mm
Integrator
trippas/AnalogComputer_IntegratorAnalog computer integrator breakout module kicad project
- Size
- 26.4 × 27 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 24
- Pads
- 82
- Tracks, vias
- 236, 65
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 May 2026
- Updated
- 1 Jun 2026
Overview
Integrator is an open-source printed circuit board by trippas, from the trippas/AnalogComputer_Integrator repository on GitHub. It is a 2-layer board of 26.4 × 27 mm with 22 parts on 24 nets, routed with 236 tracks and 65 vias.
It is built around the BC847. Its parts include 12 resistors, 4 capacitors, 2 ICs, 2 transistors and 2 connectors.
Main components
1README
README.mdAnalogComputer_Integrator
Analog computer integrator breakout module kicad project
This project design is based on classic analog computers with a modern approach and components, AD795 is used for the opmap and DG444DY for electronic switches (i have plenty of those chips avalible from and old CTscan photomultipliers AFE).
-
3x 100k inputs
-
3x 1M inputs
-
SJ input
-
IC input
-
OP (operate) and R (reset) inputs are implemented to be used with external control signals, HOLD mode is also posible.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C8, C9 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x10_Pin | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1, J2 |
| 1 | AD795 | Package_SO:Infineon_PG-DSO-8-24_4x5mm | U2 |
| 1 | DG441xY | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
Questions
How big is the Integrator PCB?
It measures 26.4 × 27 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Integrator use?
22 parts, built around the BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Integrator KiCad files?
From the trippas/AnalogComputer_Integrator repository on GitHub, at the commit this page was made from: the board is Integrator.kicad_pcb and its schematic Integrator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Integrator design in my own project?
Its repository states no licence, so its author keeps all rights: ask trippas before reusing the design.
Similar boards
- 2 layers130 × 80 mm
- 2 layers58 × 110 mm
- 4 layers124.6 × 68.7 mm
- 2 layers200 × 100 mm
Polykit x monosynth
polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer
167 parts94 - 2 layers156.6 × 125.2 mm
- 2 layers45.2 × 36.6 mm
KaffeeInterface v1
misteu/RPiCoffee
Modding / hacking of a coffee machine (DeLonghi ECAM 22.110.B Magnifica S) for IoT capabilities
50 parts64BSD-3-Clause - 4 layers43.8 × 30.2 mm
S VHS ZX Spectrum Rev. D
redhawk668/ZX-Spectrum-S-Video
S-Video Modification PCB for the ZX Spectrum
17 parts47GPL-3.0