4 layers20.3 × 68.6 mm
Carrier
samlittlewood/caravel_carrier
Carrier for efabless Caravel chip used for Google/Skywater 130nm shuttle program.
30 parts18MIT
2 layers60 × 42.6 mm
Ece16
trhussain/ECE16PCBPCB design for ECE16
- Size
- 60 × 42.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 79
- Pads
- 281
- Tracks, vias
- 309, 26
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 27 Sep 2024
Overview
Ece16 is an open-source printed circuit board by trhussain, from the trhussain/ECE16PCB repository on GitHub. It is a 2-layer board of 60 × 42.6 mm with 68 parts on 79 nets, routed with 309 tracks and 26 vias.
It is built around the ESP32-S3-MINI-1-N8, LP5907MFX-1.8 and LP5907MFX-3.3, with the JS102011JAQN among its other parts. Its parts include 22 resistors, 17 capacitors, 6 ICs, 6 diodes and 6 switches. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
LP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLP5907MFX-3.3
SOT-23-5-40℃~+125℃@(Tj) 1 10uVrms 12uA 250mA 250mV@(250mA) 3.3V 5.5V 82dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
JS102011JAQN
SMD-40℃~+85℃ 3.5mm 300mA 5,000 cycles 6V 9mm Black J-Lead Rectangular Columnar SPDT Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide Switches
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R8, R9, R11, R11, R12, R14, R14, R16 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C13, C15, C21 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C10, C11 |
| 5 | ~ | customFootprints:rockerSwitch-434133025816 | SW1, SW2, SW3, SW4, SW5 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C14, C18, C19 |
| 3 | 510 | Resistor_SMD:R_0402_1005Metric | R10, R18, R19 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D3, D6, D7 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R20 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C12, C16 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C17, C20 |
| 2 | D | Diode_SMD:D_SOD-123F | D1, D2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2.2uH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 750k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | DM-OLED096-636 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U4 |
| 1 | ESP32-S3-MINI-1-N8 | esp32s3mini:XCVR_ESP32-S3-MINI-1-N8 | U2 |
| 1 | JS102011JAQN | JS102011JAQN:SW_JS102011JAQN | S1 |
| 1 | LED CHRG | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | LP5907MFX-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | LSM6DSOXTR | LSM6DSOXTR:PQFN50P250X300X86-14N | U3 |
| 1 | MAX30101EFD_T | MAX30101EFD_T:PSON80P560X330X165-14N | U6 |
| 1 | ~ | PAM2401SCADJ:SOP65P490X110-8N | PAM2401-SCADJ1 |
| 1 | ~ | MCP73831T-3ACI_OT:SOT95P270X145-5N | MCP73831T1 |
| 1 | ~ | USB4105-GF-A-Footprint:GCT_USB4105-GF-A | USB4105-GF-A1 |
Questions
How big is the Ece16 PCB?
It measures 60 × 42.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ece16 use?
68 parts, built around the ESP32-S3-MINI-1-N8, LP5907MFX-1.8, LP5907MFX-3.3 and JS102011JAQN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ece16 KiCad files?
From the trhussain/ECE16PCB repository on GitHub, at the commit this page was made from: the board is ece16.kicad_pcb and its schematic ece16.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ece16 design in my own project?
Its repository states no licence, so its author keeps all rights: ask trhussain before reusing the design.
Similar boards
- 4 layers20.3 × 68.6 mm
- 4 layers58.4 × 43.2 mm
Audio iface rev2
bnahill/audiopulse-embedded
Miniature DPOAE infant hearing loss screening device
84 parts3 - 2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 2 layers34.7 × 1 mm
- 2 layers58.9 × 25.7 mm
LoTiBloxy
GiovaSanta/PulseOxyemeter-LotiBloxy
a bluetooth pulse oxymeter Printed Circuit Board Design Project. PCB is meant to take spo2 measurements and sends results to an application via Bluetooth
51 parts - 2 layers
PIC RGB Ornament Core
Hxntyr/PIC-RGB-Ornament-PCB
PIC-based RGB ornament PCB design with 24 low-current RGB LEDs, coin-cell power, boost regulation, and PCBA-friendly hardware.
59 partsCC0-1.0 - 4 layers52.3 × 84.3 mm
